• Welcome to For E Bodies Only !

    We are a community of Plymouth Cuda and Dodge Challenger owners. Join now! Its Free!

Search results

  1. HooToTheCore

    SOLD Used 1970 Challenger convertible top well, original date coded.

    My old top boot well material. Original to my car with date code stamped on it. Small hole about 1 inch or so. Snaps all there and in good condition. $25 plus shipping from Charlottesville, VA 22911
  2. HooToTheCore

    FOR SALE 1970 Challenger convertible top rear glass

    Used rear glass from my old convertible top. It is from a replacement top sometime in the car's life. Black crush material. Zipper works fine. $50 plus shipping from Charlottesville, VA 22911. I have the box my new top back glass came in and will ship in that. PM me if interested.
  3. HooToTheCore

    1971 Carter AVS 4966S issue...

    My '70 Challenger has a '71 440 with a Carter AVS 4966S carburetor. The idle speed screw or throttle stop whatever it is called threads through a plastic piece inserted into the lower carb body (see pictures of yellowish piece). This plastic piece has broken on my carb and the idle speed...
  4. HooToTheCore

    Convertible top installation...

    I'm planning to install a replacement convertible top on my '70 Challenger. I have an air driven combo stapler/nailer. The staples for this tool are 18 gauge L type (which I believe is a 1/4 inch crown). The minimum leg length staple for this tool is 1/2 inch. Will 1/4 inch crown with 1/2...
  5. HooToTheCore

    Convertible top question...

    I have a 1970 Challenger Convertible EW1 white that originally came with a white top (V3W). What is the correct material for a replacement top? Crush grain or pinpoint vinyl? I've seen top companies say different things about what is original. Is there a difference in the shade of white?
  6. HooToTheCore

    FOUND e body AM/FM radio 72-74

    Looking for an unmolested am/fm radio for my Challenger convertible. Non working is ok. Reasonably priced. A fully serviced radio should go for around $400. Thanks, Jim
  7. HooToTheCore

    My 3 speaker dash project...

    I have a 1970 Challenger convertible with a B5 blue interior. My car has a cracked dash covered by a cheap plastic dash cover. I purchased an original 3 speaker dash in black. It is black no longer...
  8. HooToTheCore

    How do I remove the Challenger script from a 1970 dash?

    I purchased a clean, uncracked, original, 3-speaker '70 dash for my Challenger. The dash is black and I want to paint (dye) it B5 blue. To do this I need to remove the Challenger emblem. It seems as though these are attached through the dash with pins and clips. The problem is the clips are...
  9. HooToTheCore

    Three speaker grill question...

    Can anyone provide the dimensions of the outer speaker grills for 1970 challenger? (likely the same for any e body) Thanks, Jim
  10. HooToTheCore

    Rim blow switch installation and connections...

    I'm replacing the rim blow switch in my '70 Challenger. The old switch was replaced by the previous owner with a button in the center pad. The old rim blow rubber was mostly gone including the copper contacts ripped out. The tab that connects the switch to the wire coming up the steering...
  11. HooToTheCore

    22 to 26 inch radiator conversion with no cutting/welding...

    Hi all. Don't know who might be interested, but I mounted a 26 inch radiator on my Challenger's 22 inch radiator support without any cutting or welding. I did this by making an adaptor plate for the passenger side. I used 16 gauge stock from Lowe's. Attached are the measurements and pics of...
  12. HooToTheCore

    New member with a question...

    Hi all. I have a '70 Challenger convertible. Originally a 318, I'm in the process of swapping in a '71 440 I've had lying around since '85 (out of an Imperial that I wrecked). During this process I decided to restore the engine compartment and windshield frame. My issue follows. I...
Top