Search results for query: *

a white styrofoam gasket. Mopar E Body 70-74 MEGA AC Firewall Gasket Set - MANUAL

I have had intermittent problems with aftermarket ignition switches at the connector. I usually pull the connectors and squeeze the ends to make a tighter connection.

I have this same problem with my 71 barracuda and believe it is the ignition switch. I have had original switches fail the same way. I believe the problem is that when you rotate the key against the return spring it tries to push the body apart and causes poor contact on the start contacts when...

I have a 727 for free, local pick up only. Part number PK 2892031 K 2362 6663. Date 1/15/1968. Part number list for Plymouth, Dodge, Chrysler, Dart, 67-68 Barracuda 383 4bc. Needs rebuilt and is missing the valve body. Located in San Francisco Bay area 94572.

I have a 4 light bar for sale. Lenses look original and wire harness is new. Asking $200 plus shipping. Located in 94572 area.

Just got my renewal notice for the cuda and road runner. I have had Hagerty coverage for 20 plus years and no claims, so I am rewarded with a 50 percent increase in premium. The policy went up $300 per year.

wire wheel should work but ditch the vice grips and use a battery drill with a keyless chuck. Won't harm the threads.

No primer. I would use Herbs parts rattle can interior paints. The colors are spot on and easy to apply.

Try muscle car research Brass Tube Seat | Muscle Car Research LLC

don't know where the water pump housing came from but on my big blocks the boss that the bracket bolts to appears to be too short. I would try some bushings and for the belt try one a half inch longer.

I use Gunk engine cleaner on the engine and K member and 409 on the engine compartment painted surfaces. Then I use a garden hose to wash it away.

You might contact capital city mopars club they may know the car. Capital City Mopars

US Army, 71-73, 3rd Armor division Germany.

I had my am/fm radio converted to bluetooth and hands free phone by a company called turnswitch for around $500. I think their name changed to smelectechrotech. Radio Restoration | S&M Electro-Tech

what about the coil?

Not hard to modify the base plate if you have one to sacrifice. I cut the center out of this 383 base plate and tacked in a 440 center plate to lower it for a 440 install. I have this one listed for sale on this site.

The only problem I had was with a new speaker grill that had longer standoffs causing it to sit high.

I have a standard 3 light bar for sale. Located in San Francisco Bay area, California. Asking $50 plus shipping.

I have a Sparton Hi note horn with no date or part number for sale. The horn does work. Located in the San Francisco Bay area, California. Asking $25 plus shipping.

I have for sale a 1973 non AC defroster duct with part number 2936641 and date code 73. Located in San Francisco Bay area, California. Asking $30 plus shipping