Search results for query: *

Did you tell the wife about your plans?

A MOPAR rainbow!

Yes in a different way. The bulkhead connectors 18 and 16 also need to be checked 72RoadRunnerGTX did a good video on the problem. https://powerwerx.com/anderson-power-powerpole-sb-connectors Just my 2¢ The red battery feed and black acc feed wires are the higher current loads. I would...

This is for stock Mopar charging system. 1:With the key in the off position should have on the alternator output battery voltage. 2:The field wires should both read zero we should have no voltage. 3: If there is voltage at the field wires with the key off, there is a wiring problem. 4: If no...

Charging circuit. I would say for the most part you know what your doing. Below might be help.

Yellow and Blue makes green. Do mine count twice?

Been through there myself un countless times and relatives live there. Theis guys hang out there a lot! That's why the towns in the area have those names around the intersections. Because you feel it!

I can't agree more! The Amish buy one buggy in their lifetime. Some might think they are so far behind. But when it all goes down they are so far ahead.

https://www.forebodiesonly.com/forum/threads/dash-lights-a-brighter-possibility.34086/ As far as grounds for the dash. it is established through the dash mounting bolts on the A pillars and the defroster area bolts. The the light bar is ground through the mounting screws. Then light socket are...

Above is good information. Also check the bulkhead connections. 16 and 18. Bad connections reduce voltage there. Alternator not feeding the load to splice one and not bringing the battery up to full state of charge. I myself would check voltage at the battery and at the alternator stud. That is...

There is a change coming to refrigerant. That might be the biggest factor in cost to AC replacement or repair. Phasing out of refrigerants. Several alternatives are being considered to replace R-134A, each with its own set of advantages and challenges. Here, we’ll examine the most prominent...

I agree with that. It's reminiscent of the BEE strip.

Now you know for the next one!😜

When you look at your car if you like it leave it. It seems you are questioning it. When you add something to it. You are changing the demotions visually. A vinyl top gives it style. A vertical strip or accent give it Brute. A horizonal stripe makes it look sleeker. A strobe stripe is just...

The 70 challenger deservingly carries the badge of honor of previous years BEE stripe. So many have seen that strip after they were stung! I think it is only fitting it's the one that carries it! It is very reminiscent of the Super BEE. I call it that for that is what I seen it on first. It...

Good advice above. Not sure just were you are at. E Body Assembly Sequence ASSEMBLY SEQUENCE: (some variation with different body types) I don't see vinyl top on the list. That should be done before 59 head liner. 1. trunk weatherstrip 2. body rubber bumpers 3. trunk latch mechanism 4. hood...

HEMI yes Hocky stick yes. I would paste it on there! I think it works with a CUDA not Challenger. My 2¢

It would run back in the tank. From what I think I understand. The vapor separator works like as condenser. Vapor would collect there and condense and go back to the tank. And or the vapor would be pulled to the carb and be burned. Someone might elaborate or correct.

Fuel Filter for 1975 1979-1983 Chrysler Cordoba