Search results for query: *

Hello FEBO Members: I'm requesting a little help finding out the history on my 1970 Cuda vin# BS23V0B201178 I'm currently doing an OE restoration & while it's in the shop having the body work done, I decided to try digging into it's past history. I know at one time in the 70's it was raced...

Well I never thought I'd say this, but I have to sell my beloved HEMI Challenger to finish my HEMI Dart. The build started off with a "Totally Rust Free" Challenger SE that I purchased in Carlisle in 2005 & even then it wasn't cheap - but I had a bigger vision. Out came the original 318...

Hello FEBO; I have for sale the 8-3/4 rear end out of my 70 Challenger R/T * Since I always wanted a 440 Six Pack - 4 speed with a Dana 60 & couldn't afford the real deal - I built one. So what I took out naturally was the original 8-3/4 housing * It has a 741 Sure-grip with 3.23's (believed NOT...

I have for sale 8-3/4 rear end housing with axles * Housing is super nice & has already been media blasted - sealed in epoxy & painted semi black * Axles have new "Green" bearings installed & all new lug nuts & studs * No backing plates or drums. $350.00 - Will throw in adjustable pinion...

* I'm taking a poll - what do you all think??? Prices too high ??? Too low ??? How about the quality ???

I also found up in the shop attic while doing some clean up * This Holley double pumper spreadbore carburetor - list # 6210-3 * I'm sure it need's rebuilding * Selling cheap * PM me if interested * Dan

As the attic clean-up continues * I ran across this set of OEM - 440 connecting rods pn# 1851535 * Looking for $50.00 plus shipping * If interested give me a PM * Dan

After 40 years I've decided it was high time to clean out the attic at my shop & see what buried treasures were hiding up there * Amoung some really neat things - I found a full set of BB pistons with wrist pins * If my old memory serves me corretly - I pull these pistons out of an old Super Pro...

Hello E-body brothers & sisters: What I have for sale - is a brand new Edelbrock Thunder Series pn# 1801 Carburetor * 500 cfm * square flange * electric choke * adjustable secondaries - Jegs & Summit price $345.95 - My price $295.00 * Paypal accepted - Shipping available * Feel free to PM me if...

I have for sale a factory original 3 bolt Dana 60 pinion stubber - stubber rubber is in excellent condition - primed & painted semi-gloss black - ready to install - Price is $50.00 plus shipping - Paypal accepted - Please contact Dan at MrMonteSS@aol.com - Thank you

Hello MOPAR Community: I have for sale a 1964 Plymouth Sport Fury with only 64,000 original miles. Powered by a 318 "Y" block which runs & drives great - Has a rebuilt 727 transmission with less then 1k miles - New dual exhaust. The undercarriage is very solid with only a small patch on the...

If anyone is interested - I'm removing the the 3.23 Sure-grip & housing from my 1970 Challenger R/T 440 Six Pack clone to install a Dana 60 next week 4/1/09 - It will come complete minus backing plates,brakes & drums. Asking $1000 The Sure-grip unit was rebuilt last year & works great. Contact...

I have for sale a "FAST RATIO" pitman arm for either Challenger T/A or AAR Cuda - Excellent condition - $100.00 - check prices Year One gets $175.00 & it's a reproduction. Paypal accepted & shipping available. Email MrMonteSS@aol.com or call Dan 845-473-9300 days 845-546-5523 nights & weekends.

For sale is a 3 car collection of factory Super Stockers - I would greatly appreciate it if you all on the Mopar community would pass the word - thank you !!! The first car is a 1962 Dodge Dart Max Wedge station wagon dubbed "BEHEMOTH" - many of you old timers might even remember this car -...

I know this is the E-body site - but I also know a true MOPAR lover appreciates all forms of Mother Mopar off-springs - at least that's the way I see it as a humble Mopar guy for the last 39 years. That said - I have for sale a RM21 code 1975 Plymouth Road Runner. I know it's not one of the more...

Mopar Performance #P4529783 adjustable 1.5 rockers (ductile iron) Chrome moly shafts Bolts - Bolt retainers - Spacer springs Full set of push rods Complete set-up Ready to bolt on & go! "Excellent Condition" $250.00 plus shipping Contact Dan 845-473-9300 days Nights & weekends 845-546-5523 "SOLD"