Search results for query: *

This black steering column harness trough/cover is for E-Body models. My 1972 parts book shows that part 4335 black is for all 1972 E-Body models. It is likely correct for 1971-74 E-Body models but you should check. It is not cracked. The satin plastic finish is not perfect but easily...

For sale is a extremely nice Gran Coupe door medallion for a 1971 Barracuda. This medallion is the stick-on type and the Chrysler part number is 3505457. This does not appear to be a used part but I cannot confirm so it is posted as used. Visible flaws are some minor scuffs in the plastic lens...

I have a Challenger SE C-Pillar emblem for 1970-71 models, p/n 3444937. This is the spring clip design. It appears to be NOS with shelf wear. The chrome is brilliant. There is a small scratch in the painted center. The plastic inserts have some mild scuffing but they have fantastic color...

Single groove crankshaft pulley with an overall diameter of 6-1/8" and overall depth of 1-3/4". The bolt pattern is non symmetrical. There is some mild pitting inside but overall a very good piece. Price is $15 plus shipping

I believe these parts were removed from a 1970 Challenger with a standard cluster. I believe the gage fonts are unique to 1970 models but I expect can be used for following years. Parts are in very good visual condition but but not perfect. I do not know the functional condition of the gages...

I do not know the operating condition of the electrical gauges. The plastic pieces are very nice and need just a bit of cleaning. Lens $15 Gauges $5 each Clock filler $5 (SOLD) Bezel $20 The limiter is not available. Prices do not include shipping.

I do not know the working condition of these gages. The speedometer face is rough. The rest of the gage faces are pretty nice. The lens has only a few minor scuffs that will buff out. The clock block off plate is like new. This style is specific to 1970 Challengers but will fit any E-Body...

I have only the mirror housing and stanchion. The mirror hardware is missing. It is a Chrysler OEM part and appears to be a painted mirror application. This is for 1970 only models. It is a RH or passenger side application. Price is $15 plus shipping.

This is a used vented gas cap for Dodge Challenger, p/n 3404511. It needs restoration to look nice and seal correctly. The chrome is spidered but not pitted. The seal is dry and must be replaced. I started cleaning some of the corrosion around the cams and vent. It is $20 plus shipping.

I have a used crushed can that needs restoration. It appears that someone pried against the end [not me]. I straightened most of it but it needs more massaging to smooth it completely. It is $45 plus shipping.

This is a nice used cowl screen. It is not broken. It needs cleaning. It was taped to the RH piece for a long time so dried tape residue needs to be removed. It is Chrysler p/n 2895787-L for 1970-71 E-Body models only. Price is $25 plus shipping.

I have an A-833 tail shaft housing usable for E-Body only. The B-Body shifter mount bosses were ground off. Someone suggested that this may have been done to fit the tail shaft into an A-Body. I don’t know enough to understand that logic. Anyway, it’s a usable piece for an E-Body if someone...

I have very nice 1973 glove box documents without the operator's manual. Add an operator's manual for your specific make and model and you will have a nice detail for your 1973 Mopar. The documents are near perfect with some wear and tear on the plastic packet. See the photos. I am asking $35...

I have a nice used left hand fresh air vent duct assembly. Not cracked. The door seal is soft and pliable. The outside surface has some minor scuffing. I am asking $100. Reasonable offers are welcome. Shipping is extra.

I have a used pair of 1970-71 Challenger SE sail panel emblems. The chrome is pitted to varying degrees and the color vinyl inserts are missing. The emblems are not broken. I am asking $30 for the pair plus shipping.

I have a new reproduction floor shift lens that I did not use for my 1972 B-Body because "SLAP STIK" is not printed on the bottom. I understand that some B/E-Body model years did not have "SLAP STIK" printed on the bottom. Please feel free to correct me if you know otherwise. This lens was never...

I have a brass Kelsey Hayes proportioning valve and metering block which I believe is correct for 1970-71 cars with front discs and rear drums. It needs a rebuild and it is all there. It appears someone media blasted the brackets at some point. I lightly brushed the brass so the stamped ID marks...

I have a used remote side view mirror bezel, Chrysler p/n 6027749. It is not pitted and has some light scratches. It will fit 1968-70 B-Bodies, 1968-76 A-Bodies (various years) and 1970-74 E-Bodies. I am asking $10 plus shipping.

I have an original crush can for various 1970-1974 E-Body models. It is dated coded 4/1972. More specifically this part fits 1970-71 S83 rim blow equipped vehicles and 1972-74 two-spoke equipped vehicles. This piece is in nice condition "as is" but a respray will make it perfect. A...

I have a used factory wood grain steering wheel. Overall condition is good...no cracks. Finish appears to have embedded grime and some nicks. Would be ok for a driver "as is" but not for a restoration unless it is refinished. Please do not hesitate to ask questions. I am asking $125 plus...