Search results for query: *

For sale is a pair of used 3 1/2 x 3 inch header collectors with 3/8” flanges and approximately 6 1/2 inches tall. They were partially welded on one side of the exhaust pipes and were cut off when removed so they will need to be cleaned up or cut off just below the welding. The flanges are spot...

For sale is a 426 Hemi fender cover. It is the thinner style fender cover that has the rubber inner layer. It has a melted spot on the top and could use a good cleaning but still in nice shape. Says made in the USA. Asking $75 OBO plus shipping from 22630 or local pickup. PayPal or USPS MO...

For sale is a pair of Rough Country LED flush mount lights. They are in good working condition and come with a jumper harness that has a Jeep Wrangler fog lamp connector on it. They measure approximately 4 3/4 x 3/ 3/4 overall and the actual lens is approximately 2 x 2 and have 6 LED’s in each...

For sale is a Mopar choke thermostat that is stamped 71 on the top of the body. I do not know what it fits. It is dirty and needs cleaning and it looks to have a bent/tweaked pull rod. The spring and all of the internals look good. I have tried to find a listing online for Mopar choke thermostat...

Looking for a decent left front marker housing for my 70 Cuda. Stamped with number 3403633 on the back. Reference pics below. Let me know what you have. Thanks in advance

For sale is a 440-6 coil mounting bracket. I think this is a repro but I am not sure but has no numbers on it that I can see. It’s in great condition just needs cleaned and painted. It was on a 70 440-6 I had several years ago. Asking $25 OBO plus shipping from 22630 or local pickup. PayPal,USPS...

For sale is an original Mopar NOS speedometer cable adapter. New never used or installed. Stamped with Mopar number 2538608. Does have one very small place on the end. But still in excellent condition. Has never had any seals put on it or in it. Asking $40 OBO plus shipping from 22630 or local...

For sale is a vintage STP heavyweight fender cover. It is in used condition with some cracking and does have one corner that is curled up. Asking $40 plus shipping from 22630 or local pickup. PayPal,USPS MO,check or cash in person. Thank you FEBO!!!

Thank you to everyone who built dash stands/ rotisserie and posted about them. I can’t believe that I didn’t build one many years ago. Been looking at members posts about them for a couple years and now I needed one for my current 70 Cuda and made this one. A little crude but all scrap lumber...

For sale is a used original Mopar left side hood scoop for 70-74 Challengers. It has Mopar part number 2998177 stamped on the back. I got this with some other parts and don’t know anything about it. It looks like it has been media cleaned any partially primed. All of the bolt and screw holes...

For sale is an aftermarket Mopar drum brake master cylinder. This was on my current project 70 Cuda when I got it but I am not going to use. It was mounted for several years but has never had any fluid in it. Does have some staining on the lid and has some black paint on it. Has no numbers on it...

For sale is an original Mopar divorced electric choke ballast resistor that is stamped with part number 4091034. I got this off of a late 70’s truck years ago and has been in storage ever since. I checked it with an ohm meter and shows continuity. It does need a good cleaning. Asking $15...

For sale is a new repro clutch pedal over the center spring pin for 71-74 B & E bodies. It is brand new never used pin that one side is smaller diameter. Asking $25 OBO including shipping to the lower 48. PayPal,USPS MO,check or cash. Thanks for looking just trying to fund my current project...

For sale is a new never used aftermarket disc/drum brake proportioning valve. Got this several years ago with a front disc swap kit but did not use it. It has never been installed or had any fluid in it. Could use a good cleaning has a couple stains on it but has no numbers on it. $20 OBO plus...

For sale is an original Mopar NOS air cleaner to manifold hot air tube. It is approximately 12-13 inches long depending on which side you measure. It does not have any numbers or a part label on it but I got it in the mid 90’s when I worked at the first dealership I worked at. It was originally...

For sale is an original 70-71 Rallye dash clock adjusting cable with chrome bezel. It’s in really good condition and turns very smoothly. I have had this for many years stored away. Asking $75 OBO plus shipping from 22630 or local pickup. PayPal,USPS MO, check or cash in person Thank you for...

For sale is a used original Mopar 340 cast crank balancer. I have had this for many years and never used it and the engine is long gone. Stamped with Mopar number on the back. It’s in good shape but the rubber does have some cracks in it on the back side. Hopefully someone can use this. Asking...

For sale is an original Mopar left side A/C duct for 70-74 E bodies. It’s in good used condition with some rust stains on it and the outlet side is a little wavy but still very usable. The movable piece is also in good condition. Stamped with Mopar numbers. Asking $100 OBO plus shipping from...

For sale is a used original Mopar rim blow steering wheel and cap that are being sold as cores. Both need restoration and one of the clips is missing from the back of the center cap. Asking $80 OBO plus shipping from 22630 or local pickup. PayPal, USPS MO, personal check or cash in person...

For sale is a set of 71 Cuda black front buckets and rear seat covers. I don’t know much about these as I got them with a 70 I bought and I am not going to use them. They are aftermarket but I see no labels inside them anywhere. One front back has a small scrap on the bottom of the beading but...