I found this back on the shelf that I did not know existed.
It is the legendary 9800 Performance Carter Superquad.
These are calibrated and designed without the emission
junk on the production carbs for High performance.
They require no modification to the circuits the original
carbs do to run...
I found these in my stack of Thermoquads on the shelf!
6139 is 72 340 Auto
6340 is 73 340 Auto
I will take them apart and make sure they have not been monkeyed with
or missing any parts and work freely. I will adjust the Floats and Air Door
and put back together ( I am not rebuilding them =...
Here is a New Old Stock (Thinking 15 to 20 years)
McLeod Steel Flywheel
It is 28 Lbs
SFI 1.1 Safety rated with sticker in place
10/10.5/10.95 Clutch Patterns
B and B or Diaphragm
Has provision for counter weight for cast cranks
In original dusty box.
130 Tooth Gear Reduction Starter Fitment...
Nearly Impossible to find 9800 "Super Quad"
Has been on shelf for 40 years.
Everything Complete and Moves freely as it should
Shafts are tight with no perceptual wear!
The only modification was that I installed a bracket to
adapt it to Mopar Carb linkage and Kickdown lever.
As with any carb...
For A Engine!
Here is a NOS old Mallory HP ultimate performance distributor
It is in original dusty box.
It has the Magnetic breakerless (MBI) pickup.
Also has tuning kit with different springs to tailor the advance curve.
Plus a kit to adjust the amount of advance from 14 to 28 degrees in 2...
We were thrilled to finish Runner Up @ MATS Stock / Super Stock @ MATS
This weekend.
$3,250 from Promoters / $500 for best Mopar Finisher (Thanks Mike and Paula Cotton) /
Contingency Award from Calvert Racing = A Great Day for Us!
We also had the opportunity to visit with new and old friends...
I moved a box and found four 1973 340 Automatic Thermoquads.
They have been in the shop since somewhere in the 70's
All shafts are tight and everything works as it should.
I have two 6319S and two 6340S
They are totally original and not messed with at all.
I would suggest putting a kit in them...
Here is a nice virgin set of 1971 exhaust manifolds that
have been on shelf since 70's in my Shop.
They have no damage or modifications.
Flapper is intact but will need cleaning as it is stuck
after sitting on the shelf for 50 years.
$850.00
plus $60.00 shipping in US
Here are my last set of Mopar Performance race rockers that have been
on the Shelf since 2001. They are for B Engines. I would be surprised if
you every find another NOS set.
These were the ONLY brand that NEVER broke on my National
Recording 440/6 4 Speed 1969 Roadrunner (up to 7500 RPM thru...
Here is my last set of Johnson HP Hydraulic Lifters.
These are from the Old Days and American made. Box
opened only for pictures
They are the Hardened, and Rockwell tested version (Distributed
by Sealed Power back then) and the only lifter that would hold up
in our 7500 RPM Stock Eliminator...
You can watch my Aspen 318 Wagon race a New Forn Mustang
on NHRA TV right now at Vegas Nationals. They interview the Drivers both before and after
the races as well as watch the race. My son says easiest way to watch it
is on NHRA Facebook posted Friday.
Also the filmed an extended interview...
I have not been in this storage shed for 45 years or more.
I found a large box of these lenses in there with lots of Dust~
I think they are 70 as I had a 70 Hemicuda and my dad and
brother 70 6 Pacs
Maybe someone can tell me if they fit any other years?
Lens are all in great shape.
Some of the...
Everything Brand New and only out of Box
for pictures today!
Best of Everything!
Indy EZ-1 Aluminum Heads ported by Indy
Indy Machined 440 RB with 030 Ross Pistons
Valve notches for 650 to 700 lift
Indy Intake also ported by Indy with special Valley Cover
Brand New with everything Milodon system...
Brand New 500 Stroker
Top quality Parts throughout.
Built by one of the country's top Mopar
Race engine builder (PM me for details)
and National Event/Divisional Champion
and good friend. I asked him to take his time and pretend money was No Object!
This is my identical spare engine for my...
This is what I run in my Street/Strip 440 Valiant
It runs in the 10's thru the Mufflers and I can drive it anywhere!
As featured in Mopar Max Magazine and LVMS Track Pro Champion
In our testing it has proven to be over 2 Tenths and 2 MPH faster
than the Purple Shafts that I have run for 20...
Brand new in the Box and Plastic
Top of the Line Racer Brown Mark II Rollers/Tie Bars
Racer Brown was the Vender for Mopar Perf. Cams and Accessories
for many years and absolute the best Mopar Pieces.
These have been in my Race Trailer for probably 15 or 20 years.
They are what I still only run...
Here is the nicest 340 Block I have ever found!
Sitting in my shop for 30+ years.
It is Hot Tanked/Oven Baked.
The align bore is perfect
It sonic tested great
They Deck test very Square.
It Standard Bore and very low mileage
I was going to bore it .020 but some people would
possible say Hone and...
I am picking up 3 race engines in Missouri and
heading back.
I can take either I40 or I702.
I can put my one or two car trailer behind my 2022
Ram 3500 Dually if there is a reason to.