I have 2 Centerline wheels 5 on 4 1/2 bolt Pattern of a 72 340 Cuda 8 3/4 rearend 15x8
I also have the aluminum 4 speed it is not an overdrive all 4 gears I verified myself
ratios are as follows 1 gear 2.66 to 1 2nd gear is 1.88 to 1 3rd gear is 1.50 to 1 an 4th is 1 to 1
i want 500.00 for...
THIS TRANSMISSION gear ratios are as follows 2.65 to 1 1st gear 1.88 to 1 2nd gear 1.50 to 1 3rd gear an 1 to 1 4th gear i an also changing this ad to best offer over 500 an local pick up in Peoria Az 85345
hi all i found a aluminum case 4speed trans not overdrive its to short for my car it has 23 spline input 30 spline output has only one shifter mounting pad im in Arizona an if you want it shipped you can set it all up
hi all im looking to buy some new head gaskets but not from summit or jegs both say they are on backorder.... hoping someone has what i need bore 4.080 and compressed thickness of .080 for a 72 340 engine
i have a HP built 904 transmission you get a SFI aproved flex plate 2800 stall speed torque converter the hardlines an B&M shifter the slip yoke which is the 2.18 small u-joint i am looking for 750.00 an trying to find local in Peoria Arizona if you are in another state you need to set up Shipping.
hey everybody i have a 68 4 speed with a long tailshaft housing the measurement from the trans mount Pad to the end of the output shaft is 12 inches it wont have the shifter plate im asking 1000.00 for it the owner said it was a working transmission behind a big block ....
hey everybody i have a 68 4 speed with a long tailshaft housing the measurement from the trans mount Pad to the end of the output shaft is 12 inches it wont have the shifter plate im asking 1000.00 for it the owner said it was a working transmission behind a big block ....
hi all im in need of a 4 speed manual trans for my cuda IT CAN BE A 26 OR 30 SPLINE OUTPUT SHAFT BUT IT NEEDS TO HAVE THE MOUNT PAD 9 INCHES FROM THE END IF THE OUTPUT SHAFT END