I went pretty smooth. I went with a drop base air cleaner and 3" element. It just fit. I made a video where I go over it all in detail and check for hood clearance if you interested or bored lol
Looking for rear seat belts for my car. I would prefer driver quality originals. The fronts are black even with the red interior. Which I believe is correct.
Any help would be great!
I was able to wrap up a couple little projects and felt like it was as good a time as ever to take her on her first maiden voyage! Things went pretty well. No leaks, nothing fell off lol, didn't have to get towed back.... but I do have a few things I am going to address this week. I had put...
My gauges came back from Redline and got them back in the car. Getting them back in took some patience. Wiring harness isn't long enough to make all the connections while the cluster is laying on the column. They work great and with the new led's they are lit up nice now. Its been raining...
Quick update.... my fuel pressure is stabilized and the updated sending unit fixed it. More on that later.
My dome light never worked...it was just missing it’s bulb. I like simple ones! Picked up an LED to brighten things up. I popped the cover off and saw they had painted the inside of...
My fuel pump sending unit came back from being upgraded with a 3/8" return. I was pleased with his work. This should take care of my high fuel pressure issues. I installed that with a Holley hydra Mat to help with not running out of fuel for the electric pump.
I ended up needing to replace my...
thanks i appreaciate it!
I have had some extra time on my hands waiting for some parts to come in. Been tweaking my air cleaner set up and finally have one I am real happy with. Made another video about it. Nothing earth shattering here. hopefully more entertaining.
After my initial test drive the deck lid actually was rattling because the weather stripping was so compressed. Figured it was a good time to replace it.
An BIG update!
First I bought new flashers and they fixed the turn signals and the hazards work. The headlights work. All that needed was to have the battery cables tightened on the battery. I had them just hand pressed on.
So on Sunday the 16..she fired right up!. No issues at all...
Thanks for the feedback!
My plan was a low deck 471 street engine with low maintenance, so we chose hydraulic flat tappet cam. 10.5 comp for pump gas. I figured Max wedge heads might be a bit much for the combo. I ended up choosing the stock port EZ heads to not have to worry about the hood...
Had a good week and found some time out in the garage! I was able to finish wiring my ignition, fuel pump and overdrive. Also installed the horns. Ran a tap through the bracket and fender to make sure I had a good ground. Also installed some Firecore wires. The 45 degree boots were perfect...