Search results for query: *

Here's some photos of the one I just got from Bob at ABCMoparts. I have not installed it yet but I dont anticipate any issues as it is an original core and looks in good shape. I can take some closer shots if you want.

I just received one from Bob at ABCMoparts. He was great to deal with and the pad looks great.

Hi Sal, can you show how you connected the ends both at the tank and the engine end? I am installing a Fitech with a new Tanksinc tank. I am thinking of doing the same as you (using 2 pre formed 3/8 lines) but I am unsure how this will connect at the ends. The Tanks inc supply is moved to the...

Oops, my bad.

Sorry, realize you are probably looking for Cuba pics, mine is obviously a Challenger.

I’m in the same boat. My car didn’t have tailpipes so I’ve been collecting pictures. Here’s what I have, don’t know if will help.

One thing still not making sense is why is that ground wire from the horn black/white? Shouldnt this be solid black like the wire in the horn? I also have not been able to get a test light to work at that black white wire. I put my light on a positive source and the neg on that black/white...

Ok so here is where I am at with sorting the horn not working. I have tested the horns by applying power directly and they work. I have tested the horn button in the steering column with a test light, applied a positive source to the pointy end and clipped to the black wire on the tab in the...

Im thinking I found the correct one: Mopar 1 Piece Proportioning Valve I was looking for just the switch but looks like it comes as a whole prop valve.

Called M&H tech help and they confirmed the 72 diagram on the mymopar site and in the manual is incorrect. 72 and 73 should be identical according to the Mopar schematics he was comparing to. The 72 diagram may be a holdover from 71 as it matches that diagram. He did also confirm the missing...

Yup, going to call them tomorrow when they open, and will post up what they say. Was wondering if this was a known thing and/or those diagrams are incorrect? Also dont know where that black wire should go assuming the 73 diagram is correct. Does that look like a plug for a low brake switch...

Hi all, would appreciate some help sorting some wiring issues. Has anyone ever noticed the diagrams for the 72 and 73 Challenger are slightly different: http://www.mymopar.com/downloads/1972/72ChallengerB.JPG http://www.mymopar.com/downloads/1973/73ChallengerA.JPG Specifically pins 12 and 24...

Went to the Big E today. Glad I went although I could do without the traffic and crowds. I appreciate the livestock, sheep shearing, goat milking demos, etc. That stuff is great. There was a decent Midway sectuon with all the rides and a ton of food. Some really good and a lot of fried...

Ahh, this makes sense, thanks. So I am going to order an aluminum housing, pump, install kit (bolts, gaskets), thermostat and new nipples from Mancini. Can you guys school me on which nipples to get? You can see in the photos the home brew elbow/reducer that is on the original. The heater...

Thanks. Yeah there may have been some budget minded mechanics in this car's past :) Interestingly I found those spacers on the Mancini website. INDY Water Pump Housing Spacers Says they need to be used with part #440-22 but I cant find what that is. Did someone shave that housing down to...

Nice, I look forward to seeing more of it. Any plans on what you will do?

On to the next project. The previous owner strongly suggested I shiuld change the radiator from the 2 core to a 3 core as it ran hot. It never overheated on the short drives I have been on but my guages also dont work so no idea how hot it was getting. Plus it had the outlets on the wrong side...

Wracking my brain on how to fix this other than replacing the crossmember. The shock wont fit in as is and the angle is wrong too. Here is what I came up with for now: I cut the sleeve off the shock and put a small bend in it so the angle was correct. This should work for now until I get...

Finally got some time on the car tonight and here is what I found. What the...