Search results for query: *

Have you made any progress? I'm having similar problems

Do you have all the hardware (cables, knobs, etc.) for the clock reset and the odometer reset?

No, sorry. :(

I am selling a 26" radiator that was in my 'Cuda. The car has a hemi that runs hot, so out of caution, I decided to replace it with a Glenn Ray. The radiator was working perfectly fine prior to removal. lt looks like the one that came with the car, but it does not have any markings or part...

Someone suggested that since the original K member was for a 318, the engine mount adapters may have changed the engine height and that is why the wood shim was installed. (see picture of current engine mount) I'm thinking that if I purchased the 'correct' base plate I would still have this...

I don't see any part numbers on any of the three pieces. They are probably repro. I would like to see where the part numbers are located on factory versions of these parts.

I have a three piece shaker hood assembly in a hemi cuda with two four barrel Carter carbs. Carbs are not original to the car. I took the assembly apart for some maintenance and noticed that the adapter plate has a 3/4" piece of plywood attached to it. It is probably acting as a spacer to...

Thanks so much for the pictures. That's helps my confidence in being successful. I'll keep you posted on my progress.

Thank you for the additional info. I'm starting today on the repair. I'll let you know how it goes.

Thanks for the pics. Do you agree with pschlosser comments to remove brake pedal assembly to gain better access. Someone told me to drop the steering column, but that does not seem necessary if I follow your and pschlosser's steps. I agree about the seat... it's a six way so heavy...

I can't locate where the booster is leaking. The only thing connected to it is the hose from the intake manifold and all connections. I tested the hose. I also removed the check valve from the booster and tested it. It seems fine. In addition to the poor braking, I was told to hold the...

Excellent advice! Just what I was looking for. Thanks so much!!!

I have a leaking power brake booster in my Cuda that needs replacement. On the one hand it looks pretty straightforward, but accessing the four bolts way under the dash looks very challenging. I'm hoping that someone else has done this repair and can share that experience with me in order to...

i have a similar interest in finding a car. i dont have the vin. best that i have is the original license plate number from NJ motor vehicles in nj dont have the records for vin they say is there another way of finding vin? i could create the first half based on known options... but...

In the above picture I see where the luggage rack holes for the 4 mounting points are. Where are the two rear holes located? Are they two of the 3 holes labled labeled factory mounting holes?

Can you show where the factory pre-drilled holes are on the back of a decklid. I have to mount one on a car that did not come with one. Thanks!

I need to adjust the convertible top on my '71 Cuda so that the guide pins go into the proper position when the top is fully closed and latched. It is difficult to show in the pictures, but the guide pin on the passenger side is off by about 1/2" and ends up outside the hole pressing on the...

I would like to have the windshield replaced/repaired on my ’71 Cuda Convertible. It appears to be the original windshield, but it is very pitted and has some wiper scratches. My understanding is that when a windshield is pitted, polishing it is not a great idea due to distortion and the...

I'm looking for a chrome luggage rack. An original , not a stainless repop. Thanks, Ray