WTB 70 Challenger Fender trim molding

[big john]

Looking for driver side or both sides fender trim molding. Not wheel well molding. Must be in nice condition.

 

[moparlee]

Just to clarify, the ~6" long trim piece at the back of the fender on top like the SE trim pkg?

 

[big john]

Just to clarify, the ~6" long trim piece at the back of the fender on top like the SE trim pkg?

The one that goes above the headlights.

 

[terrywalker]

Like These?
1970 Dodge Challenger Parts | ME1545 | 1970 Dodge Challenger R/T Black Headlamp Bezels Pair | Classic Industries

 

[terrywalker]

Or these?
MOPAR NOS 1970 1971 CHALLENGER FRONT HOOD & FENDER TRIM MOLDINGS WIDE CHROME | eBay

 

[big john]

Or these?
MOPAR NOS 1970 1971 CHALLENGER FRONT HOOD & FENDER TRIM MOLDINGS WIDE CHROME | eBay

 

[big john]

I need the ones that are not attached with the headlight bezels. Like the 3k ones. I have a T/A I don't know if there different then a R/T

 

[terrywalker]

Someone can correct me if I'm wrong but the wide moldings extend the front of the fenders out further than the stock headlight bezels do. So, you'd need the matching molding for the front of the T/A hood. The T/A used the standard R/T headlight bezels on the front of the fenders. I've never seen the molding separate from the headlight bezel. You are looking for a molding similar to the rear quarter panel edge moldings except for the front fenders? I've never seen them like that.
Terry

 

[terrywalker]

Here's a Challenger with the wide moldings that extend the fenders and hood about 1.5"

1970-71 challenger photo with the wide front edge moldings - Bing images

 

[big john]

Here's a Challenger with the wide moldings that extend the fenders and hood about 1.5"

1970-71 challenger photo with the wide front edge moldings - Bing images

You are correct, I'm wrong I found the correct ones, Thank You all