WTB 71 Challenger wide trim moulding mounting hardware

[Mark Selby]

Hello, I have a set of the 71 only wide chrome trim for the front of my Challenger and need to figure a way to mount it!
If anybody happens to have a set in any condition I’m interested or if you have found a way to mount them I would appreciate it....... any pics of the stock hardware would be super helpful..... thanks in advance! Mark

 

[Mark Selby]

Here is a partial pic of some of the mounting pads.....

 

[Challenger RTA]

I have a nos set.I have to look at the hardware. Didn't find hardware. It looks like you have what you need on the fender.the screw thought the holes in the black painted area.The hood trim the screws go through the back side of the hood. The hood should have holes or drill them and the studs get cut nuts.
The studs look long enough for cut nuts.

 

[Mark Selby]

Thanks... yeah, mine look the same and the center piece I have is still in the Mopar wrapping with the screws.... I guess I can make up some thin rubber pieces to replicate what I saw on the corner pieces..... the center looks like it mounts pretty easy....

 

[Challenger RTA]

My bad I thought it was a picture of you fender. Good Luck

 

[Mark Selby]

My bad I thought it was a picture of you fender. Good Luck

Ok thanks.... yes, I have exactly what you have....... I have a few pics of some restored cars and that is all I have to go by.....