Contact seller
Getting things put aside for Carlisle and thought I’d pre-list some stuff here. Vendor space G-123/4/5 (right outside Bldg T). Pics on request. In-person deals preferred. Nats pick-up is also a possibility.
Original 2944450 Steel Wheels – Gathered painstakingly over the past 20 years. All are dated for 1971 model year. $500-600 each
1/16/70 – original paint
1/15/70 – powder coated medium gloss black
12/11/70 – original paint and primer
9/24/70 – stripped and e-coated
NOS AAR/TA Air Cleaner Lid – Part number 3577395, very rare, correct for N94 (fiberglass hood) equipped E-bodies. Also correct part for 1969.5 “Lift-off Hood” A12 B-bodies (although the part number is probably different). $500
NOS E-Body Front Shock Absorbers (Pair) – Part number 3402417, correct for 1971 Cuda/Challenger with 340/383. $1200
Original 1968-70 340 HP Exhaust Manifolds – Casting numbers 2863553 (LH) and 2863549 (RH). Media blasted and coated with Eastwood Factory Gray Hi-Temp Coating. LH manifold is as mint as they come, dated Nov 69. RH manifold has some minor pitting in the lower portions and the heat riser is missing (not plugged), has the casting number and “L2” stamped lightly on the reverse side. $750
Complete Set of New SS Brake Lines - 70-71 Challenger – Unused stainless steel brake lines from Fine Lines/SS Tube for a 70-71 Challenger with PDB and 426 Hemi. The only hemi-specific part in this kit is the set of lines that connect the M/C to the proportioning valve. All other lines will work on any 70-71 Challenger with PDB and the long 1-piece front to rear line. I bought these years ago at the Mopar Nats and the long line was never bent for shipping. $100 (about half the cost of current retail)
Thanks for the ad!
Original 2944450 Steel Wheels – Gathered painstakingly over the past 20 years. All are dated for 1971 model year. $500-600 each
1/16/70 – original paint
1/15/70 – powder coated medium gloss black
12/11/70 – original paint and primer
9/24/70 – stripped and e-coated
NOS AAR/TA Air Cleaner Lid – Part number 3577395, very rare, correct for N94 (fiberglass hood) equipped E-bodies. Also correct part for 1969.5 “Lift-off Hood” A12 B-bodies (although the part number is probably different). $500
NOS E-Body Front Shock Absorbers (Pair) – Part number 3402417, correct for 1971 Cuda/Challenger with 340/383. $1200
Original 1968-70 340 HP Exhaust Manifolds – Casting numbers 2863553 (LH) and 2863549 (RH). Media blasted and coated with Eastwood Factory Gray Hi-Temp Coating. LH manifold is as mint as they come, dated Nov 69. RH manifold has some minor pitting in the lower portions and the heat riser is missing (not plugged), has the casting number and “L2” stamped lightly on the reverse side. $750
Complete Set of New SS Brake Lines - 70-71 Challenger – Unused stainless steel brake lines from Fine Lines/SS Tube for a 70-71 Challenger with PDB and 426 Hemi. The only hemi-specific part in this kit is the set of lines that connect the M/C to the proportioning valve. All other lines will work on any 70-71 Challenger with PDB and the long 1-piece front to rear line. I bought these years ago at the Mopar Nats and the long line was never bent for shipping. $100 (about half the cost of current retail)
Thanks for the ad!