GTX JOHN
Well-Known Member
Here are my last set of Mopar Performance race rockers that have been
on the Shelf since 2001. They are for B Engines. I would be surprised if
you every find another NOS set.
These were the ONLY brand that NEVER broke on my National
Recording 440/6 4 Speed 1969 Roadrunner (up to 7500 RPM thru lights)
Every other brand would have a failure every 10 passes no matter how
I massaged and worked on them.
These are a special CWC metallurgy specified my Mopar Perf. and also
carefully prepared with a tight control on the Hardness and Ratio (Most other were all
over the map including the factory Produced Mopar rockers). These were
contracted by Mopar to Crane as the vender to Mopar's demanding specifications.
There was a very high rejection rate of over 50%.
They are Brand New in a very Dusty old original box. I opened it up for pictures.
A couple have very very slight superficial minor surface rust that will brush right off.
They have hardened Adjusters and nuts in unopened plastic.
These are Head and Shoulder a better American made product from the old days,
than the Chinese crap produced today. My Dad always told me "You Buy the Best -
You only Cry Once!".
Back in 2001, I paid = $424.00 for these parts.
I want $375.00
Plus $16. Shipping in US
or $28. in Canada
Quote Reply
Report Edit
on the Shelf since 2001. They are for B Engines. I would be surprised if
you every find another NOS set.
These were the ONLY brand that NEVER broke on my National
Recording 440/6 4 Speed 1969 Roadrunner (up to 7500 RPM thru lights)
Every other brand would have a failure every 10 passes no matter how
I massaged and worked on them.
These are a special CWC metallurgy specified my Mopar Perf. and also
carefully prepared with a tight control on the Hardness and Ratio (Most other were all
over the map including the factory Produced Mopar rockers). These were
contracted by Mopar to Crane as the vender to Mopar's demanding specifications.
There was a very high rejection rate of over 50%.
They are Brand New in a very Dusty old original box. I opened it up for pictures.
A couple have very very slight superficial minor surface rust that will brush right off.
They have hardened Adjusters and nuts in unopened plastic.
These are Head and Shoulder a better American made product from the old days,
than the Chinese crap produced today. My Dad always told me "You Buy the Best -
You only Cry Once!".
Back in 2001, I paid = $424.00 for these parts.
I want $375.00
Plus $16. Shipping in US
or $28. in Canada
Quote Reply
Report Edit
