Latest activity
-
Check with this guy. @halifaxhops @halifaxhop -
Xcudame replied to the thread Hello Y"all.Welcome to FEBO from the desert! Would be nice to see some pictures of your E-Body.
-
Xcudame replied to the thread 833 question.The bell housing is obviously different, but the transmission is basically the same. As mentioned in 1972 the "Std" had this gearing...
-
Yes they all fit , as long as it has the rear shifter mount on the tail housing different ratios were used over the years
-
It would generally be expected that a small block transmission would have a close gear ratio and a big block transmission would be a...
-
Xcudame replied to the thread New old guy.Welcome to FEBO from the desert! Nice collection of Mopars and hot rods!
-
Just joined today folks. Thanks for the welcome. I’ve recently retired after 49 years in the car business - the last 38 as service...
-
Xcudame replied to the thread Big block headers ?.Welcome to FEBO from the desert! Love your B7 Challenger. TTI headers are the best. Some people complain about their coatings burning...
-
Welcome to the site , Love the B7 Blue !! TTI are the best fit & quality , Dougs are a close second
-
Xcudame replied to the thread Sudden Lifter Noise.A spun connecting rod bearing makes a tap tap sound that changes with RPM. 🙁
-
I am VERY disappointed. Of all the Dudes and Military Veterans on this site, and not one rude/sarcastic comment about rear height...
-
The above info is good. I would still do both if you have a engine lift. so many times been there, done something, knew better, Would of...
-
Challenger RTA replied to the thread Sudden Lifter Noise.Did you test the lifters. Just off the top of my head. Place the lifter in oil and push on the lifter with a push rod. Testing... -
Ggran coupe john replied to the thread 73 barracuda upper and lower front grill assembly diagram needed..I figured out the valance filler on the 71. The reproduction piece fit great. The grill is another story soon to be told. Finished...
-
Katfish reacted to Copilot's post in the thread I modified the reverse lights on my 73 challenger (Pics included). with .I taped the outside with painters tape and glued from the inside with super glue gel, and when you pull the tape from the outside it has...
