Small Block - Shaker Intake Question

[DaveH]

Hey guys,

Can those that have shaker cars with small blocks let me know what intake fits the best under your shaker to fit the hood properly? I know each car is a little different I am just researching a little more. I'm putting in a 340 if that helps. I want an aluminum intake not the original cast intake.

Thanks
Dave

 

[Avalanche]

If you have the original, it's best to measure what you have and then look into something as close as possible. I think the holley street denominator is close, but don't quote me.
I'm sure someone with more knowledge will chime in.

 

[DaveH]

No I don't have the original intake. Plus I'm converting the car to a shaker car it originally had a flat hood. Thanks

 

[challenger6pak]

The small block shaker cars have the most space to work with. You can build your own spacer. The original 340 intake is around 7 inches tall. I have one loose and can get an exact measurement if you need it.

 

[DaveH]

The small block shaker cars have the most space to work with. You can build your own spacer. The original 340 intake is around 7 inches tall. I have one loose and can get an exact measurement if you need it.

What intake do you have?

 

[challenger6pak]

I have a 1970 factory cast iron manifold.

 

[Steve340]

I have a Mopar Performance aluminium dual plane with 1/4 inch holley space fits good.

 

[Chryco]

If you have the original, it's best to measure what you have and then look into something as close as possible. I think the holley street denominator is close, but don't quote me.
I'm sure someone with more knowledge will chime in.

if your looking for a OEM shaker kit contact;
tommythechryco@outlook.com