They ARE metal,
I also measured the sided holes, 3 on each side and they are slightly larger, about .260 and they "may fit"
Do you have the part # from NAPA?
70 Challenger
Hood insulation has 15 holes to attach to the hood.
Holes in hood are .230 and the metal clips measure .280, they wont fit.
I measured the width on the clips that DO NOT squeeze together it's physically too large.
I really don't want to drill out the hood or grind each side of each...
My antenna cable was not installed (major oversight) before basically everything.
Where is the hole from the interior to the under the fender area?
What needs to be removed to locate the path through the side of the firewall to the under fender area?
Thanks for your help, pictures are always...
I have purchased the items listed below from OER. What I can't seem to find, is the blades/blade assembly from the same site or elsewhere?
Product # ME7600
1970-74 Challenger, Barracuda, Cuda; Windshield Wiper Arms...
MSRP: $139.99 pr
View Product Details
Correct reproduction of the...
I have the original visor mounts and rods and also replacement visors. What I don't get is the latch side where it connects to the rear view mirror. The rod is not long enough to reach to it.
What part(s) am I missing?
I've searched and have found basically nothing on the subject.
My belts were very faded/dirty. I boiled them with several water changes, until the water was clean. Then I "fogged" them with black spray dye and wiped the excess off which allowed the pressure to "push" the die into the fabric and also preventing the stiffness that comes with spray dye. The...