• Welcome to For E Bodies Only !

    We are a community of Plymouth Cuda and Dodge Challenger owners. Join now! Its Free!

7DCUDA383A's latest activity

  • 7DCUDA383A
    7DCUDA383A reacted to Challenger RTA's post in the thread Sounds bad with
    Like
    Like
    .
    Nothing more satisfying when you know you got it. I shows when you closed the door! Good that's all it was.
  • 7DCUDA383A
    7DCUDA383A reacted to Xcudame's post in the thread Sounds bad with
    Like
    Like
    .
    I'm liking that every time you fire it up and let it run, it sounds better and better!
  • 7DCUDA383A
    7DCUDA383A replied to the thread Sounds bad.
    Update , thanks to Xcudame (Randy) with guidance I figured it out why it ticked so loud , someone (me) left a bolt behind the dust cover...
  • 7DCUDA383A
    7DCUDA383A replied to the thread Sounds bad.
    I'm an outside the engine mechanic not inside engine mechanic , do you know a good video or website that gives detailed information.
  • 7DCUDA383A
    7DCUDA383A replied to the thread Sounds bad.
    This was the rockers before .
  • 7DCUDA383A
    7DCUDA383A replied to the thread Sounds bad.
    All I did was replace the oil pan and pickup tube , ''402'' oil pan and pickup from 440source , then took the valve covers off to check...
  • 7DCUDA383A
    7DCUDA383A replied to the thread Sounds bad.
    When I took the covers off to check them after the hand crank got stuck there was oil in there , both sides , the engine cranked freely...
  • 7DCUDA383A
    7DCUDA383A replied to the thread Sounds bad.
    Not sure what idle speed , no tach in car , it has Pypes exhaust .
    • 61fJspyBZ0L._AC_SX569_PIbundle-6,TopRight,0,0_SH20_.jpg
  • 7DCUDA383A
    7DCUDA383A posted the thread Sounds bad in Engine Issues.
    1st start up , sounds real bad , I know I put a video up of the rockers loose , I have know idea any thoughts , it had 75 oil pressure...
  • 7DCUDA383A
    7DCUDA383A replied to the thread Dipstick Trans O-Ring leaking.
    Im starting with the O-ring , getting ready to pull it out and make sure its not damaged .
  • 7DCUDA383A
    7DCUDA383A replied to the thread Dipstick Trans O-Ring leaking.
    https://store.440source.com/images/1211067.jpg , or this one , its flexible .
  • 7DCUDA383A
    7DCUDA383A posted the thread Dipstick Trans O-Ring leaking in Transmission and Drivetrain.
    This Fricking car again , I added a gal of trans fluid a weeek just to have some in there to see if it leaked and it didnt , now today I...
  • 7DCUDA383A
    7DCUDA383A reacted to cuda joe's post in the thread Rocker wiggle with
    Like
    Like
    .
    it has hydraulic lifters they pump up from the oil pressure when the engine is running .. when the valves are fully closed you can...
  • 7DCUDA383A
    7DCUDA383A reacted to Chryco Psycho's post in the thread Preload the carb with
    Like
    Like
    .
    If the engine is new you want it to fire ASAP so yes fill it & yes the window by your finger is correct .
  • 7DCUDA383A
    7DCUDA383A reacted to Xcudame's post in the thread Preload the carb with
    Like
    Like
    .
    Yes, put about 25 to 30 cc (ml) in each side. Don't need to completely fill the bowls as the fuel pump will quickly do that when turning...
Show older items
Back
Top