• Welcome to For E Bodies Only !

    We are a community of Plymouth Cuda and Dodge Challenger owners. Join now! Its Free!

Chally's latest activity

  • C
    Chally replied to the thread AAR resto.
    Just a suggestion, try speaking with Brian at IMM engines. He’s built lots of small block strokers and can spec and order a cam for you...
  • C
    Chally replied to the thread Stripped Sheet Metal Holes.
    I use solid copper wire, fairly small gauge to fit close to flush into the screw threads. I believe the wire I’ve used is from...
  • C
    Chally replied to the thread Stripped Sheet Metal Holes.
    I’ve had success tightly wrapping a small piece of copper wire in the threads of the screw, squeezing the wire ends in with needle nose...
  • C
    Chally replied to the thread Top Catwhiskers.
    Correct, it is a very tight fit. I was only able to slide the first inch or so in place by hand then had to tap the channel downward...
  • C
    Chally replied to the thread Exterior Door Handles - How Many Different Manufactureres ?.
    I used a pair for my Challenger from Dales Cuda Shop as I had read good reviews on the forums and Dales confirmed the handles had the...
  • C
    Chally replied to the thread Top Catwhiskers.
    Went through this on my ‘70 Challenger a couple years ago with my original door panels. I used silicone spray as a lubricant with a hard...
  • C
    Chally reacted to Katfish's post in the thread American autowire 12V supply during cranking with
    Like
    Like
    .
    Either will work, diode is easier to integrate, small and cheap. Tape it up in the wiring harness. Look for a diode used in solar...
Show older items
Back
Top