Recent content by deaks

Turns out mine was only 3 spd and an earlier model that didn't have the blocker pins according to the B & M guy. Last weekend i took the car to the track and it shifted without problems, i ran a 12.35 at 111 mph best but didn't go beyond the first round in the gamblers even with a .08 light...

Discovered a couple of reasons why the shifter dont work well, the cable is melted despite having a heat protective sleeve and the fitting that goes on the shift lever is upside down making it tight to the the trans case, i've flipped it over, ordered a new cable and i'm goint to try and loop it...

Other than the cable and fittings at the trans, would it be the same as the chrysler unit ? What shifters and fittings do you have and are they in good working order. ? Just trying to decide which way to go. cheers Mick

Ishman is this the same as yours ? because i might buy it and get a new top plate. Mick http://www.ebay.com/itm/Hurst-Auto-Trans-Shift-Lever-Assembly-Shifter-Assy-/151679640982?hash=item2350cfa596&vxp=mtr

The hood and bumpers weigh a lot, my Dart hood with all the hinges and other parts was around 66 # if i remember right, i bet the e body one weighs a ton, i also fitted fibreglass bumper brackets as well as bumpers. Mick

MMISSILE I'm slightly worried about the shifter being worn if it's old and not shifting right, i will email you. Ishman That looks very neat and i've heard good things about the quarter stick but i notice there's no gate to see what gear your in.

What does it weigh at the line ? Mick

I didn't want to hijack the thread below so decided to start my own. I have a 70 challenger with centre console and a quicksilver ratchet with reverse pattern vb. Besides the fact that it looks quite ugly on top of the console, it doesn't shift very well. Often it wont find 3rd and struggles to...

Have you got the gate that goes into the console as well please. Mick

HI Have you got a stock auto shifter and linkage for a 727 and kick down linkage ? Mick