Recent content by gliderider-06

Thanks everyone! Sale pending.

Ok, Now that was not the correct fender tag. This IS the one from the inner fender. I got it off, soaked it in thinner for 6 hours to get the paint build-up off and it is readable as follows: R11 V5X Y05 EN1 FJ5 A01 C55 L31 M21 M31 FJ5 H6X9 000 819 004322 E44 D31 BH23 G08 103**4 or (103*14) the...

Thats cool! No the vin for the car is BH23G0B103014. The tag on the car is almost un-readable. Maybe if it was taken off it could be read from the bottom. The car was sublime green new and the light package not sure of. I added the road lamps if that is what the light package is. I will try to...

The fender tag on the car is un-readable, but the one that was in the ash tray reads: Y05 EN1 EB5 A01 C55 L31 M21 R11 EB5 N6B5 000 829 003616 E44 D31 BH23 G0B 110348 Thanks again!

It is the same car, and the crossmember had a hole and was not all rotted out. It was repaired with some plate steel welded into it. The original frnder tag was all beat up from the person I got the car from. There is a fender tag that I found in the ash tray, but I have no clue on how to read...

Did I do something so wrong to it? I can't even sell it on e-bay. Any comments or suggestions would be appreciated to help me sell it. Thanks

I added some more pictures for your consideration.

I'm selling my 70 barrcuda. It has new rebuilt motor/trans. 383 bored .030, forged flat top pistons, comp cams 284 extreme energy cam, roller rockers, dp4b intake, 750 holley, electronic ign. Headers/duals flowmasters. Tci 3400 converter, 3.23 suregrip. Street/strip valve body, 5:1 kickdown...

I can't say that I figured it out, But after bolting on the bumpers, valence panels, re bolting the tail lights in with new hardware, it is working now. All I can figure is that somewhere in the car it has a bad ground circuit that is completed with all the parts bolted on it. The big question...

I call my 70 Barracuda "The Mistress". My wife always says, are you going back out to the garage and mess with your girlfriend. So I started calling it the Mistress.

38 for me.

could there be a missing ground somewhere like a steering column to body/dash. makes me think it has lost a ground somewhere since it starts when the turn signals are on. I have the neutral safety switch jumped and was that way before removing all the lights before paint. I have also now have...

I have a 70 Barracuda that has a starting gremlin that I can't figure out. Everything was working fine on it until I pulled the lights out of it to paint the car. At first, it would not crank over with the key (after pulling all the lights out of the car), but it would start if the key was in...