Recent content by HANG TEN

If anyone is needing a rear bumper, let me know. I have a bumper off a 70 Challenger that's in good shape except for the common slight upward bow. I'm doing a bit of a restoration and I bought a new one since it's been bugging me for years. Can't stand to put this old one in a dumpster though...

Does anyone have any experience with a speedometer that becomes noisier as you pick up speed? It seems worse on colder mornings, gets worse as the speed increases, and the speedo becomes both noisy and very inaccurate, reading much higher than the actual speed driven. I have a A833 overdrive...

I bought a set from jegs and was very unhappy with it. Master and booster were chevy part numbers and it wouldn't work well with mopars lower vaccum inches. Swapped them out with real mopar parts and it worked great.

I'm looking for a power brake pivot assy for a 70 e-body and the booster mounting plate. Jim 512-818-5786

If you come upon a power brake pivot assy for a 70 challenger with mounting plate i'd love it. 512-818-5786

I'll bump it up with my 53.

I'd check all the engine area main grounds. Don't put the main grounds up against thick new paint. (battery and engine block ground)

LOCATION my 21 inches from front to below scoop as shown in that diagram did not include the chrome on the front of the hood.

Mine is 21 inches from the front, 9 from the back and 12.5 from the sides.