Surfcuda's latest activity
-
SSurfcuda replied to the thread Door Adjustment.Thank you. I’m just a backyard engineer and was thinking that either the Striker Post or Latch Assembly would pull the door in as...
-
SThe striker post is also adjustable. You may need to adjust it in toward the interior to pull the door in more.
-
SNo expert on this, but that is what I was thinking too. My experience on this is limited, but if the entire rear edge is proud, as...
-
SSurfcuda replied to the thread Door Adjustment.Moparleo, Thanks again! Your info is always insightful and welcome. 🌴
-
SSome information
-
SSurfcuda replied to the thread Door Adjustment.Appreciate the info MrCuda. I was working on the door seals when I noticed the door wasn’t aligned. The gaps are pretty good around the...
-
SThe door latch is fixed. You will have to adjust a hinge, probably the upper. The door need to come in a bit too. How is the fit to the...
-
SMy passenger side door does not align when shut as shown in the attached photo. The door needs to come in about a 1/4 inch. Before I...
-
-
SSurfcuda reacted to moparleo's post in the thread Question on door latch pin in quarter panel jamb, ‘72 ‘Cuda with .The door should not move up or down if the upper & lower hinge pins are tight to the hinge. If it was tight, the door would not latch...
-
SUp front I run an MT 26x10 tire on a 15x8 wheel with 4.5" backspace. Fits well. BTW, that about a 255/60 in metric terms. I test fit...
-
SThis is me, I've been moving for the last month and a half and I'm not set back up yet, I should be in another week maybe two at the...
-
SThe door lock cylinders in E-bodies are the same as other car lines, but the cylinder is encased in the door handle assembly. The lever...
-
SSurfcuda replied to the thread Biggest Tires???????.Hi Kansas, I’m thinking simply go with the widest front tire that fits with no issues on a stock fish. This size tire should work on the...
-
SSurfcuda replied to the thread Rear Sway Bar Question.No the bar was positioned correctly, but it was a B Body Sway Bar not an E Body. That’s why it appeared odd. I just sourced an E Body...
-
-
SSurfcuda reacted to pschlosser's post in the thread FOR SALE 1970 cuda convertible rear seat bottom with .I just checked the parts book. Interior Seating is tricky to navigate, but it looks like the seat bottoms are indeed different part...
