Xcudame's latest activity
-
Sorry I'm not able to help, I used a factory 2016 radiator with a Dakota filler, it has top hose on passenger side and bottom hose on... -
Xcudame replied to the thread 70 barracuda vin question.I think you're OK. Post a picture of the VIN, door sticker or Fender Tag! The numbers on the body are stamped pretty deep on your car...
-
Xcudame replied to the thread I can see clearly now..😂 (I really miss that button!)
-
Xcudame replied to the thread 70 barracuda vin question.Pictures will help a lot.
-
Reads like it is an assembly plant mistake. I'm curious to see the pics. BH23G0 B or E ?
-
Thanks for that pic! Yep, that looks just like what I saw when I worked at Dodge Main, the only difference is the Volare & Aspens had...
-
Xcudame replied to the thread Lug Stud Recommendation.The knurled section is smaller (.665" vs . 675" for the Dorman), so should work!
-
https://www.amazon.com/dp/B00TO6109Q?ref=ppx_yo2ov_dt_b_fed_asin_title https://www.summitracing.com/parts/msr-8040#overview This is...
-
maybe 100-110 PSI is on the low side, but several different things can affect your readings, such as valve and ring wear, cold vs warm...
-
ya it is, but that's today's world, but I know one thing I will be checking it all, every time.
-
Xcudame replied to the thread 1970 CUDA 440.I agree with @pschlosser, the rear end noise might be something other than the rear axle gears. Check the U-joints. Going from 3.23 to...
-
1. Rear End - The noise is likely something mechanical. It could be wear, a bearing, a U-joint, it may be something else. Those noises...
-
Xcudame replied to the thread Lug Stud Recommendation.RockAuto (or Dorman 610103 part number)...