Xcudame's latest activity
-
Xcudame reacted to pschlosser's post in the thread 73 barracuda driverside outside door handle? with .23-18-20 Link, Front Door Latch to Outside Handle, #2999-374 This link rod is the same for all years E-body, so it can be found from... -
Xcudame replied to the thread Upgrading 73 Challenger with 318.."So I asked the shop to do a standard valve job and they told me they do not do iron heads and it would take 2 weeks if they sent them...
-
Xcudame replied to the thread Convertible Boot Clip Question.I too replaced the white door panels with black ones. For whatever reason, the factory plastic just starts flaking off in the blazing...
-
I'd love to see someone from Legendary chime in on this. I wonder where they got the measurements to make the boot covers from and if...
-
Yes, I took some liberties on my Fish. I like the contrast personally. It gets smoking Hot here in the summer and White is much cooler...
-
Xcudame replied to the thread Valve springs for a 318 stock?.When you replace the one spring, let us know if it solved the problem.
-
Thank you. Yes, I what want to replace THAT one for the moment to give me the piece of mind of finally have found the noise. But...
-
Xcudame replied to the thread Valve springs for a 318 stock?.Melling VS150 or Qualcast 32672 are very close to the factory stock 318 springs. Are you planning to change just the one spring? If it...
-
Okay Vert Owners and those wanting some knowledge to put in the tool box. Today was almost 80 degrees. I laid the boot out on artificial...
-
Sounds like you guys had fun! It is almost bring the car out season here ( I know it is year round for you guys).
-
The '72-74 manuals on PDF's appear to be scarce as hens teeth. I had a thread here and another forum looking for one for free. I...
-
Nature abhors a vacuum! :rofl:
-
Everything about a big shop costs more. Heat, surface water costs, taxes, etc. Crap expands to fill the space. I could drive in and do a...
-
Figure what you need and double it. I got a 30x40 with a 12x40 enclosed lean too. 16 foot ceilings in the main part and it’s not big...