• Welcome to For E Bodies Only !

    We are a community of Plymouth Cuda and Dodge Challenger owners. Join now! Its Free!

Xcudame's latest activity

  • Xcudame
    Xcudame replied to the thread OIL PUMP GASKET YES OR NO.
    I've seen small blocks with them and without them from the factory. Since you're having trouble finding one, make sure both surfaces...
  • Xcudame
    Xcudame replied to the thread Engine mounting bracket..
    $200 is actually a good deal! So grab it! You can actually fabricate a 340/360 mount out of a 318 mount by adding a triangle piece of...
  • Xcudame
    Welcome to FEBO from the desert! A 426 Hemi will fit fine in a 72/73 E-Body! Best to weld a skid plate to the k-frame as the 6 quart...
  • Xcudame
    Xcudame replied to the thread Drip rails and window seals.
    Here's drip rail mouldings on my 71 Barracuda. They have never been removed as far as I know. please ignore the dust and cat hair! Dust...
    • IMG_20260717_091008926.jpg
    • IMG_20260717_091015000_HDR.jpg
    • IMG_20260717_091017631.jpg
    • IMG_20260717_091020152.jpg
    • IMG_20260717_091119143.jpg
    • IMG_20260717_091126023.jpg
    • IMG_20260717_091130253.jpg
  • Xcudame
    Xcudame reacted to MoparCarGuy's post in the thread Riser block rear suspension??? with
    Agree
    Agree
    .
    I would also check your driveshaft angles once you get the suspension heights sorted out. The Tremec 5-Speed requires correct angles to...
  • Xcudame
    Xcudame reacted to HPP's post in the thread Riser block rear suspension??? with
    Agree
    Agree
    .
    The SS springs you took off have a bias built in to them to allow the car to launch straight at the drag strip. This bias tend to make...
  • Xcudame
    Xcudame reacted to 540HemiCuda's post in the thread 440 build questions with
    Agree
    Agree
    .
    I agree, quench is a critical component with today's pump swill to avoid detonation. You can have detonation with a low compression...
  • Xcudame
    Xcudame replied to the thread Mopar Engine Ruggedness.
    I figure my 5.2 (318) in my Dakota will last a lot longer because I have a new 5.9 (360) ready to drop in it's place. That seems to be...
  • Xcudame
    Xcudame reacted to slantfish's post in the thread Mopar Engine Ruggedness with
    Like
    Like
    .
    I had a 2002 Dakota with a 5.9, that was the best truck I've ever owned hands down. It made it to 280,000 miles and the only major...
  • Xcudame
    Xcudame reacted to Rob C's post in the thread Mopar Engine Ruggedness with
    Like
    Like
    .
    I purchased from the original owner a car he bought off the show room floor. A ‘79 Magnum. It’s a 318/9”4/2.76 set up. Average everyday...
  • Xcudame
    Xcudame reacted to Kez's post in the thread Headliner Hole Locations with
    Like
    Like
    .
    THANKS - that was exactly what I was loooking for. Had seen it a while back and bookmarked the link from another thread, but the link...
  • Xcudame
    Xcudame reacted to pschlosser's post in the thread Headliner Hole Locations with
    Like
    Like
    .
    I concur with Xcudame. install the headliner, then feel your way around, palpating to find the opening(s), like the shoulder belt and...
  • Xcudame
    Xcudame reacted to Challenger RTA's post in the thread Flock cameras.....BAD with
    Like
    Like
    .
    I have always found it condescending when the statement is used. " You know it's for the public safety and good." It just shows me...
  • Xcudame
    Xcudame reacted to 540HemiCuda's post in the thread Flock cameras.....BAD with
    Like
    Like
    .
    Why all the hoopla over these cameras? If you have most any electronic device that can connect to the internet, you are being tracked...
  • Xcudame
    Xcudame reacted to Challenger RTA's post in the thread Flock cameras.....BAD with
    Like
    Like
    .
    Sign of the times. They won't last long. Here in PA Hunting season clears the air. It will be the last thing they record. By the way...
Back
Top