These are pair of Disc Brake hubs, and all 10 of the wheel studs, for the two piece rotors, (rotors and hubs) that are used on the 1970-72 B & E body line of cars.
4 1/2" inch bolt pattern.
All the studs are RIGHT HAND thread.
Selling at $150.00 for everything, plus $24.75 for the mailman in...
From my transmission rebuilding days, found out that i have this new old stock, transmission band used in the 426 Hemi Torqueflite automatic transmissions.
It's a Raybestos manufactured band.
I'll sell it for $325.00 bucks, plus whatever the mailman is going to want to your zip code.
Payment, i...
YES, i know this is the "E" Bodies site, but please forgive me for asking this question here on this site, also.
It's important for me to find out.
Would anyone out there in the Mopar world, know where the Purple, 1971 Hemi GTX 4 Speed car, in now located, and possibly who the owner is?
It's had...
This is a rear window defogger blower motor, and bezel, used in the A, B, E, body line of cars.
Selling at $90.00 for both of these parts.
I figure shipping will be $24.75 in a USPS, large, flat rate box.
Payment i accept Pay Pal, or a USPS money order.
Thank's a lot.
Jim V.
hemi71x
Contact seller
Putting this FEDERAL power steering pump up for sale, that literally have been hanging on the garage wall for decades.
If you don't know the difference between pumps, please look at the last picture in my ad.
1. FEDERAL pump. Bare unit, no pulley or bracket(s) for this one.
Has...
Contact seller
Well, guess i collected, saved, power steering pump mounting brackets from back in the 70's when cars were find able, to be picked over, at the U-Pull-It wrecking yards out here in California.
Ok, here's what i have.
1. PS pump mounting brackets for the old Poly 318 engines with...
I have this two speed windshield wiper switch, that my research tells me it's for the 1972 and up, E body line of cars.
Rallye gauge instrument panel, and non rallye gauge panel.
#3488773, stamped on the switch.
I'll be comfortable in selling this switch, letting it go, for $40.00.
Prices for...
I also have these Pin Type, and Slider Type, caliper mounts for sale, that are for the standard 10 3/4" inch brake rotors.
To go with the single piston calipers that i also have for sale, if you need them.
All cleaned up, soaked out in a pail of Evaporust, then painted up.
Ready to bolt on...
I have this power steering pump, mounting bracket for the FEDERAL pump, that is used on the Mopar big block engines.
Officially i think it was used from the 1969 to 1972 years, but use it on any Federal pump that you want to, and any year engine that your using.
I cleaned it up, soaked it out...
...order.
I figure i will mail them out in a USPS flat rate box at $18.40 anywhere in the USA.
Interested buyers, send me a message, and then we can go from there.
Thank's a lot.
Jim V.
hemi71x
**UPDATE**
2 of the mirrors have been sold.
The 71-72 mirror, and one 73-74 mirror, is still with me.
I have these disc brake spindles, that i am putting up for sale.
Please read this ad thoroughly and understand it.
Both of these spindles are for the LEFT Side, DRIVERS Side of the car.
The spindle pictured on the RIGHT, is used on the 1970-72 B & E body line of cars.
It has a smaller diameter...
I have a few sets of radio knobs from the 71-74 B body line of cars, and the 1971-74 E Body cars, Barracuda's and Challanger's that i am listing, for sale.
Selling at $20.00 for each set, which gets you the two inner knobs, and the two outer knobs.
Payment, i accept Pay Pal.
Will need a few...
I have these two 1970 E Body, Cuda & Challenger shifter knobs up for sale.
$30.00 each, plus a few bucks for the mailman, to your zip code.
Payment, i accept Pay Pal.
Thank's for looking.
Jim V.
hemi71x
EDIT:
One of them has been SOLD.
I have these two 1970 E Body, Cuda & Challenger shifter knobs up for sale.
$30.00 each, plus a few bucks for the mailman, to your zip code.
Payment, i accept Pay Pal.
Thank's for looking.
Jim V.
hemi71x
This is my 1964 426 Superstock, Race Hemi, exhaust system, that i am putting up for sale, out of my 40 + year collection of parts.
This is officially a 64 system, with 1 7/8 tubes on the header pipes.
The header pipes and exhaust system is priced at $6,000.00.
That's the price, no "offers"...
I am listing my 1964 426 Race Hemi Crossram Intake Manifold set up, from my extensive 40 + year collection of Mopar engine parts.
This manifold is date coded 6 . 17. 64
Casting number 2468043
This Aluminum intake has original Carter 3861 4bbl. AFB carburetors on it, and fuel lines that i made...
These are a pair of Carter AFB carburetors that are used on the 1964 Race Hemi Crossram, intake manifold. #3861S
They are intact, and nothing is missing from them.
Been in my collection for the past 40 + years.
Selling at $1,450.00 for the pair.
Payment for my parts will be a cashiers check...
I am putting my vintage OEM factory, Mopar, Chrysler, Dodge, Plymouth, air cleaners up for sale.
These round ones are for the 59-64 cars that are equipped with the 361, 383 413, "Long Ram" and "Short Ram" (Crossram) (Sonoramic) Intake manifolds.
The Chrysler letter series cars, and lots of the...
I am putting my vintage, new old stock, OEM factory, Mopar, Chrysler, Dodge, Plymouth, air filter elements up for sale.
The oval ones are for the 58-62 cars that are equipped with the 350, 361, 383, 413, Dual 4bbl. inline, intake manifolds.
The round ones are for the 59-64 cars that are...
I have this two speed windshield wiper switch, that my research tells me it's for the 1972 and up, E body line of cars.
Rallye gauge instrument panel, and non rallye gauge panel.
#3488773, stamped on the switch.
I'll be comfortable in selling this switch, letting it go, for $40.00.
Prices for...