Search results for query: *

The plastic control panel on dash is different. Duct under dash is the same.

Agreed, that's where I'd start. Measure voltage to coil/ballast resistor while trying the key. Disconnect connector on column and you can do it yourself. Ignore stuff at bottom, that's for a 3G swap.

Are Cuda and Challenger different?

Thanks for the update, I'll probably pick that tool up too.

Good looking car, what part of FL?

I put a dash cap on 20yrs ago and it looked great. Got a wild hair and bought a redone dash for $800, 10yrs ago. Dash cap was nicer, no comparison. I'm seeing dashes are now $2k, no way I'd pay that.

But, if it's just a cruiser, why bother? I agree, most cars only get 50-100 miles a year, going to cruise night. Sway bar isn't going to do anything.

Easy, tape a couple of Walmart bags around it, and go to town.

Check the install instructions on that kit. They require drilling the control arm. I'd rather copy what Surfcuda did, Addco kit is just an L bracket.

Why not hit that tab with an angle grinder.

Same happened to me. It's a common misconception that the speedometer is gear driven. It's actually magnetically coupled, so when the bushing wears out, you get the jumpy needle. Had the worst vendor experience ever, paid idiot to go through the whole cluster, he just glued on a new needle, and...

My mistake, should have said the sock/filter, sorry

Maybe pull the sending unit to have a look, pay close attention to the float

Mopar 53032456AE Bell Crank, this is the part needed to convert your stock gas pedal to drive by wire and maintain kick down functionality needed for the 904/727/518 transmissions behind a 3G Hemi. Fully tested and functional, includes the wiring harness, $125 includes shipping to US Paypal...

You notice any rotation of that bracket, lot of force there? Maybe a longer back tab and 2 smaller bolts would eliminate that possibility?

Nice, that's some sweet mods!

Check pics here, will be easy to spot https://ebay.io/m/XSyXWE

You need to check whether your control arms have the tabs for the sway bar on them.

Nice, definitely lot of work getting it off the frame :)

Absolutely has value, shipping will be the issue. Best to sell locally