Search results for query: *

I have the typical (I believe) wiper motor not homing when the switch is turned off. I've heard different things like there is a disconnected wire inside the motor or a missing ground on the outside of the motor, but I couldn't find any particular post about it here anywhere. I've also got to...

Thanks for all the replies! DUH.. no I never thought to just disconnect and short the wires from the switches to see if the lights would go out! (just goes to show you don't necessarily get smarter when you get older.. LOL). "Should I be looking over my shoulder?" Probably... he he

Hey guys..so for the longest time, I've not been able to put bulbs in my interior lighting, down at the corner of the convertible trim panels. I put a whole new rear light harness in a couple of years ago, thinking I just had a short somewhere and the lights wouldn't turn off when the door was...

Hey guys.. I have a couple of these moldings for sale. One is pitted (driver's side) and the other is in pretty good shape. Selling both for $50. Waiting on the new ones to come in a few days, then I'll swap them out. I'm going to estimate about $10-$15 for shipping.

Thanks pschlosser... Actually, I installed new hood emblems a couple of years ago also, and those haven't faded, so there's a mismatch. This thing is definitely light orange now, not red, the way it used to be. I don't know why it bothers me so much, I just know how stunning that emblem looked...

Hey guys.. I'm wanting to repaint the red, inner part of this emblem. Its only been on the car a couple of years, but the red paint has faded badly and I want to repaint it. I was wondering if anyone had a particular paint they could recommend for this? Something that would hold up better than...

I just had my 70 Chall converted, but I used all analog gauges. I paid a shop to do it, since I didn't have the time or the patience to do it correctly. Cost a pretty penny but it looks AWESOME.

For some reason, amazon wouldn't let me copy the link to the actual webpage. But this is the same part made by the same manufacturer The Manufacturer was TRQ Hopefully this link works

For some reason, amazon wouldn't let me copy the link to the actual webpage. But this is the same part made by the same manufacturer The Manufacturer was TRQ Hopefully this link works?

Reporting back.. the last one I ordered was from a seller called AM Auto parts on amazon. I'm pleased to say, the cam moved without too much effort. But I also chose to file out the bottom of the cam, so that the turn signal lever fit more snugly when the screw was tightened, and that seemed to...

That's hilarious. I recently bought some USA made bits as well! And they drill through steel, where the cheaper, DeWalts don't hardly even drill through steel...how funny.

Thanks for all the replies. Yeah, I might have chosen to rip the thing apart and drill out the rivets and all that stuff, but I didn't want to cause more damage to the unit... But since i'm probably throwing it away, I guess it wouldn't matter🤣 I'm waiting on a new one to come that I've...

I thought about trying to do that, but in order to pry the cam off the old one and put it on the new one I think I'd do more damage to the plastic than it would help.. Plus you've got to transfer the wiring over as well of that cam. CORRECTION: Not Standard Auto, but Skyward Auto Products.. see...

Hey guys.. so just today, I ended up trying to replace my switch in the column. I had bought one from RockAuto (I was ordering other stuff) and what came was a defective switch. The manufacturer is Standard Auto Products and the switch itself looked OK, but it had a significant defect. It was...

I just tried to take mine out for the second time and this time, the left (drivers) side bolt won't stay put and keeps turning with the nut... JEEZ... So I'm going to have to have the heater switches taken out to get to that bolt to replace it (too small for my hands to fit through). I was...

Here's the new dash installed.. thanks for all the help and advice! I ended up using OER gauges, which seem to work fine. They were also able to use that voltage regulator I provided, no problem (not sure what they did to make it work?).. The clock doesn't keep time, but I don't think any of...

I wish I had my car back, its in the shop. But I would have tried to make it!

Sorry, not sure if I called you or not. Someone is supposed to come get them this coming Monday, but if you're still interested, let me know.

Okay.I'm out of town at a funeral, but I'll call you soon Matt😉

OK, I figured out what the wheels, trim rings, center caps and the tires cost, plus mounting and balancing. The cost for all this will be in the $1500 range (minimum), so I'm pricing them at $1000. Thanks