Search results for query: *

Thank You Much.....

I am in need of the screw that holds the turn signal are. It goes thru the directional signal assembly and screws into the end of the directional arm??

I can see that now. But my housing is all together, directional signal switch, A01 ignition key lamp and I did not want to take it apart again. I just bought the tool to release the bullet plugs and I think I will just remove that nylon end and do it that way. Thanks guys....

Crush can is off. But I also have the turn signal switch installed along with the V01 ignition switch lamp and all that needs to come off before I can remove that section shown in my ohotos. That really does not make sense to me? I think for me, I would rather remove the 4 wires by...

Hi. I am trying to install my cruise control/directional arm in the steering column. The white nylon plug will not go through the small square hole in the column housing?? Do I have to pull those wires out of the nylon plug and insert them first and then install the plug after?? Seems odd...

OK folks. Got it. I read a post on here about the connectors to the ballast resistor and elsewhere. So I went out and just wiggled the wires on the ballast connector and the car started right up. The wires looked brand new, but I guess when these cars sit they have a way of corroding inside...

Changed ballast resistor and still having same problem. As long as I hold key in the start position the car will run. As soon as I release the key the engine stops? I think my ECU may be faulty.

Hi, Car started fine yesterday. Today I turned the key, car started right up and as soon as I released the key she died. Did this several times with the same ending. If I hold the key all the way in the start position, it appeas to want to stay running until I release the key. Seems this...

Ya, when I get them direct from OER. I think they are back ordered from you know where. Offshore.

Ya, Like that was all I needed lol

Yes. Both brand new side marker lights were causing a direct short because the person in China who assembled theminstalled the two wires backwards. They said that stuff happens? Sending me a new set. Who would have thought to look there when I just took them out of the box?? Buyer Beware...

Dont know, but I am pissed. Those were not cheap but they were cheaply made. My old ones had a separate spade plug welded to the outside of the bulb holder which the ground wire was plugged onto. These new OER ones seemed to hide all that under a plastic sheath. I will be calling them...

I spent 5 hours today isolating the front lighting harness which was just bought from year one. I ended up just disconnecting (unplugging) the two front side marker lights and the two front valance parking lights. I then sent power down number 11 and did not blow a fuse. I then attached just...

OK Did some more probing. First I should say that I recently changed the front end lighting harness and also installed 4 new OEM side marker light housings with the attached pigtails. I was thinking a headlamp switch or the dash dimmer switch which are both original to the car and maybe why my...

OK Did some more probing. First I should say that I recently changed the front end lighting harness and also installed 4 new OEM side marker light housings with the attached pigtails. I was thinking a headlamp switch or the dash dimmer switch which are both original to the car and maybe why...

I noticed my taillights were not working and my side marker lights and also my dash cluster lights. I went under the dash and found a 20amp fuse blown. I changed the fuse, turned the light switch on and no side markers, no tailights and no dash cluster lights. I went back under and the fuse...

That website ad is three years old for Carlisle. Look at the dates?

Looking to meet up at Carlisle with anybody who has a 70 challenger se headliner shell for sale. Just need the shell not the console, but will take anything available as long as it is nice and not broken.

Totally Auto use to sell this but they are no longer around. Can anybody direct me to the textured light argent silver paint for some interior work on my car. Overhead console. I can't use smooth or gloss. The totally auto stuff was spot on. They had their private label on it so I do not...

This is a decent ebody crush can dates 9-69. It has been beadblasted primed and painted the low gloss black. It has the horn wire and is very clean. $75.00 and I will include FREE SHIPPING