Search results for query: *

Mission accomplished It took more effort than i would have thought to chase the threads, so I am glade a checked first, but all three are cleaned up and functioning. Since there were no bolts in these threads when I took the apart it might have been a combination of damage threads and years of...

Thank you everyone for the information. the 5/16 18 seemed close but since I cleaned all three of the ones I had with a battery terminal brush and it would not fit in any of them, I just wanted to make sure before using a tap on them. Thank again

I am trying to figure out what size and Theard bolt is used in the bottom of the rear bumper guard for 1970 Challenger shown below. It is the bolt that connects to the frame bracket, it is close to a 5/16 X 18 but that will not work. I am thinking it must be a special bolt. Matt

I ended up buying the Dayton HB889 from Rockauto Partially since I am using Dayton RB60 for the I-bushing on the other end of the leaf spring. They are a stiff rubber that will deform when squeezed (see picture) The Moog bushing is hard plastic that will not deform when you squeeze it, and you...

Do you know if the Dayton HB889 are rubber or if any of the others are rubber similar to OEM The Moog K7308 are made of Hard plastic and the ones I removed are rubber