Search results for query: *

Can someone let me know what date code is? Not sure if its 69 or 2009. Was thinking about putting into my 73 Challenger

Can someone confirm this is correct, the manual has a bogus picture, 73 Challenger, thanks !

Quick question, just rebuilt whole front end, i put torsion bar in today. Actually, only took a couple wacks to seat it in completely into control arm. My question is do you make sure it bottoms out into control arm ? Thanks ahead of time

Oh brother, was mounting up steering box the 2 bolts on the right ran in no problem. Went to go tighten the 1 on the left side and ran into much resistance more than half way down. I didnt want to use an inpact and make things worse. Looks like the threaded hole in k member could be jacked up a...

Does anyone out here know what size is the roll pin that goes into steering coupler? Bought the car in pieces and getting ready to put steering box in and coupler. Thanks ahead of time

Putting together whole front end. want to make sure of location of calipers. they are either forward or back. Want to make sure i dont have the spindles backwards. I do have the stock replacement brake lines from inline tube Is this picture correct? its about the only thing i could find...

Trying to put upper control arms with Moog offset bushing K7103 into place. Having a clearance issue. I definitely dont want to beat it in, problem is those metal pressed in washers on the ends of the bushings. Any advice would be greatly appreciated

Happy New Year first of all, getting ready to install new gas tank and filler neck in 73 Challenger. I was thinking the filler neck needs to go through gromet and then install tank. After several attempts and talking to myself. Didnt get anywhere, there has to be a way that someone out there can...

Have a 73 Challenger , power disc and rear drums, is the proportional valve rebuildable? Just spoke with inline tube they told me they are unavailable. Is there a way to test an old one to see if it works? thanks for any feedback

Does anyone know if there are replacement bushings for stock rear sway brackets? thanks ahead of time

Good afternoon, well got a head scratcher here. I have 73 Challenger its a 340 4 speed car. It had a 323 open rear end. I have a 742 323 sure grip. I ve had it for years just for this swap out. Yoke turned by hand both ways, so what could go wrong? Put new springs in car detailed out the housing...

Just want to verify correct colors for 73 340 car bellhouse and 833 trans. Mine now is blue, im assuming its all original. Car had only 51k on it. Its a Challenger

Looking for a set of nice beauty rings 14" s either a set of 2 or 4. Let me know what youve got thanks ahead of time

68-70 B body shifter bracket, Hurst 6348 50 + shipping

Looking for a set of Magnum 500"s chrome 14 x 6 im located in NE Florida thanks

Have a nice steering column Ebody 70-74 needs a minor wiring repair. 185. I'm in Fl

70-74 Ebody 4 speed peddles 300. Plus shipping

Looking for a set of torsion bar adjusters, lca bolts/nuts and any other hardware to put it back together entire front end for my 73 Challenger If anyone is aware of a kit someone puts together. Would appreciate the lead.

Looking for passenger side upper control arm. For my 73 Challenger Located in Florida, thanks Dennis

Just got car back from paint shop my dash frame structure is toast, so looking to replace it, contact me here or dennispsalm23@reagan.com thanks