Search results for query: *

Hey guys.. several years ago, I upgraded the cam with a Comp Cam kit, for slightly better performance on the 440. I believe the lift was .477, so not super radical. However, since adding the cam, I've had a runnability problem, where the engine will not rev above about 3000rpm and bogs on...

Hey guys...I'm having a friend come visit and I know I want to take him in the car, but he's an above average size guy and I need some help either finding a seatbelt extender or just use another type of belt that will interface with mine. I have the Pontonier 300-2 style belts in my car, but...

Hey guys.. so I'm finally getting around to putting the snaps on my convertible boot. I bought this boot new about 5 years ago, but never went through with the snaps nor put the corresponding holes in the convertible panels to utilize the snaps. Does anyone happen to know, is there a "spec" for...

I'm trying to paint my fender screws to match the body color. As it turns out, it appears my screws are the "black oxide" type and won't take paint well. Does anyone either a) have any suggestions of what I can do to make those screws take and hold the paint? Or, b) what type of screws are...

Hey guys.. my 2-speed wiper motor is not homing the blades. I've tried grounding the motor and the wiper switch in the panel; no change. I've attached pics of the motor. I was wondering if anyone has been able to get to the homing switch inside the motor WITHOUT removing the motor from the car...

This is the set of gauges and switch panel that I just removed from my car. They are in good to decent shape. All the gauges worked except the clock (which never works!). $159 plus shipping, which would be expensive due to the packing I would have to do to secure it. Could only upload some of...

This came out of my car when it was replaced with a new one. The pigtails for the rear lights were all replaced shortly before removing it from the car, so they're fairly new. Just know that its been spliced in a couple of places, but could be used/restored if you're patient enough to take the...

These are used and were just removed. Only one of them has pitting, the other one is pretty clean. Asking $50 for the set, plus shipping. In the Austin TX area. Thanks.

Hey guys.. so I put new emblems on the car about 4 years ago (it had none when I bought it) and one of them imploded on me. It is the R/T symbol I bought new from Year One. At first, I noticed the red insert paint fading, and then the paint itself started to chip off! I couldn't believe it. So...

I have the typical (I believe) wiper motor not homing when the switch is turned off. I've heard different things like there is a disconnected wire inside the motor or a missing ground on the outside of the motor, but I couldn't find any particular post about it here anywhere. I've also got to...

Hey guys..so for the longest time, I've not been able to put bulbs in my interior lighting, down at the corner of the convertible trim panels. I put a whole new rear light harness in a couple of years ago, thinking I just had a short somewhere and the lights wouldn't turn off when the door was...

Hey guys.. I have a couple of these moldings for sale. One is pitted (driver's side) and the other is in pretty good shape. Selling both for $50. Waiting on the new ones to come in a few days, then I'll swap them out. I'm going to estimate about $10-$15 for shipping.

Hey guys.. I'm wanting to repaint the red, inner part of this emblem. Its only been on the car a couple of years, but the red paint has faded badly and I want to repaint it. I was wondering if anyone had a particular paint they could recommend for this? Something that would hold up better than...

Hey guys.. so just today, I ended up trying to replace my switch in the column. I had bought one from RockAuto (I was ordering other stuff) and what came was a defective switch. The manufacturer is Standard Auto Products and the switch itself looked OK, but it had a significant defect. It was...

Set of (4) of these for sale. Will post tire sizes soon. Tires were new in December 2023. Will not ship these, local pickup only in the Austin TX area. Thanks.

OK, so I know this topic has been covered a zillion times, but I may finally be ready to move forward with the upgrade. I was wondering, does anyone have particular issue with the "OER" brand gauges? They're on the lower end of the price scale, so not sure. Also, does anyione know for sure if...

Hey Guys, I have this 1968 dated intake that came off the Challenger. I replaced it with an Edelbrock Performer (aluminum) and have no use for it. I would prefer if someone could come pick it up from me (Austin TX area) because I'd rather not ship it. It's HEAVY and the cost of shipping may be...

Hey guys.. I have a set of 14" Rallye Wheels with (nearly new) Goodrich TA's on them. I replaced them with the Road Wheels (pictured) and may want to sell them. What should I expect to get for them? (I don't have any current pictures of the Rallyes but you can see them on my profile picture...

Hey guys... I have several of the Trim Plates (metal, with the woodgrain decal) to sell and I'm getting a lot of questions about the difference between the two, Auto and Manual. Is there a PART NUMBER difference? Or is it just the sizing that's different, somehow? 2899802 is the part number...

Hey Guys.. been a while. I'm dealing with what I call a "stumble" in my 440.. its been going on forever, but I've been eliminating some other issues related to vibration like replacing the correct, weighted flywheel, new billet Harmonic Balancer/Damper, all new ignition stuff (except for the...