Search results for query: *

Do these look like the correct rear seat belts for a 1972 Challenger? Found in a box with the car. The short belts are about 13 inches long. Please see the pix attached. Thanks. Mike.

Does anyone have a diagram or pictures of the engine bay wire harness hanger locations? Basically what type of hanger goes where to secure the wire harnesses to the firewall & fenders. I’ve got a new hanger kit but it came with no diagram. TIA, Mike.

Does anyone know where to find these interior side window trim clips? See pic. I’ve got one that’s broken. They hold the hockey stick-shaped interior trim piece on top of side window covering the headliner. ‘72 Challenger if that makes a difference. Thanks, Mike.

Is this the correct assembly of the bulkhead connector? I took this picture before I dismantled the engine bay but I’m not sure if it was correct in the first place. The black seal looks odd to be exposed as pictured. Thanks, Mike.

Would someone please post a picture of where this gizmo goes? I can’t find anything on the web that shows it installed. I found it in a box of parts that came with the car. Thanks!

Has anyone had this issue? If so, what was your solution? On my 440, I don’t have enough clearance between the shock tower and the #2 spark plug to get a standard spark plug socket on the plug to remove it. Even if I could slide one on the plug I couldn’t back it out even a fraction before the...

Fixing my 1972 Challenger heater box and all vacuum actuators work except the one marked 3441324. It’s got a leak on the inside diaphram. Anyone have a spare for sale? Thanks, Mike.

The Challenger radio bezel looks to have 2 rectangular openings. The large top one is for the radio unit obviously, but what is the smaller, lower opening for and the circle cutout to the left of it? Mine was just an empty panel as seen below when I got the car. Thanks! Mike.

Wondering if there is a paint to reapply the texture on my plastic dash panels like the radio panel in the picture. It looks like the texture is rubbing off to a smooth finish underneath. Or should I just remove what’s remaining and go with the smooth look? Thanks!! Mike.

As you can see in the pic below my floor dimmer switch connector has seen better days. I’ve search the web for a replacement with no luck. Are these available anywhere? I can find a pigtail connector but it doesn’t have the plastic base plate. Is that base plate necessary? I can see the...

Here’s a picture of the adjustment piece of the Kickdown bracket on my 440. It’s a single rod setup. Is the hole shown in the picture worn out of round or is this the way it’s supposed to be? The hole on the other side is perfectly round. I can’t find a picture on the web for reference...

I got my new interior rear panels for my Challenger today and noticed that the ash tray cutouts were not there on the armrests. Would you cut them out to install the ash trays or leave them deleted. If you’d install the ash trays how would you go about cutting the panel to do the install...

These seats were in my 72 Challenger when I bought it. I’m not sure the style was an option for a Challenger but I really like the look of them. Obviously, you can see they need to be redone so I’d like to find these seat covers if they are available. I’d appreciate y’all’s help identifying...

I found a couple of 10 year old threads but wanted to see if there was any new information on repairing the Rallye Clock. Mine does not run when hooked up to power nor does the time adjustment work. I found info on Redline and a quartz conversion kit. Anything new I should be aware of?

I’m disassembling my 72 Challenger’s dash and can’t figure out how to pull off the two knobs that change the clock and trip odometer. It looks like they need to be off to remove the gauge faceplate. Thanks for your help! Mike

My 440 was rebuilt prior to my acquisition of the car. I'm curious if the valve covers are installed correctly left/right. On mine the PCV valve cover is on the passenger side and the breather & oil filler cap cover is on the driver's side. Is this correct or does it really matter? I've seen...

I tried some JB weld on this broken tab from my 72 grill. It’s the center tab on the bottom of the grill. As you can see it did not take. Anyone have a better solution? Other than that the grill is in excellent condition so I can’t justify sourcing a new one. Thanks!!

I've just finished running new fuel lines on my 72 Challenger. Since it has a 440 I ran a 3/8 inch supply line. What I'm seeing is the fuel pump has 5/16 inch ports in/out as does the vapor separator and my Edelbrock carb has the 3/8 inlet port. Question is..... do I run all 5/16 fuel hose from...

Hi y’all. I’m replacing the pitman arm on the 72 Challenger due to the ball joint seal being trashed. However, I’m not able to get the new one seated as fully on the power steering box splines as the old one. Any tips? Thanks!!

I’ve been reading through a bunch of posts about changing the tire size on our cars to wider tires but keeping the same aspect ratio ( like from 215/60 R15s to 255/60 R15s). Has anyone seen a change in their speedometer reading due to these types of tire changes? Seems like if the new tire...