I found this back on the shelf that I did not know existed.
It is the legendary 9800 Performance Carter Superquad.
These are calibrated and designed without the emission
junk on the production carbs for High performance.
They require no modification to the circuits the original
carbs do to run...
I found these in my stack of Thermoquads on the shelf!
6139 is 72 340 Auto
6340 is 73 340 Auto
I will take them apart and make sure they have not been monkeyed with
or missing any parts and work freely. I will adjust the Floats and Air Door
and put back together ( I am not rebuilding them =...
Here is a New Old Stock (Thinking 15 to 20 years)
McLeod Steel Flywheel
It is 28 Lbs
SFI 1.1 Safety rated with sticker in place
10/10.5/10.95 Clutch Patterns
B and B or Diaphragm
Has provision for counter weight for cast cranks
In original dusty box.
130 Tooth Gear Reduction Starter Fitment...
Nearly Impossible to find 9800 "Super Quad"
Has been on shelf for 40 years.
Everything Complete and Moves freely as it should
Shafts are tight with no perceptual wear!
The only modification was that I installed a bracket to
adapt it to Mopar Carb linkage and Kickdown lever.
As with any carb...
For A Engine!
Here is a NOS old Mallory HP ultimate performance distributor
It is in original dusty box.
It has the Magnetic breakerless (MBI) pickup.
Also has tuning kit with different springs to tailor the advance curve.
Plus a kit to adjust the amount of advance from 14 to 28 degrees in 2...
We were thrilled to finish Runner Up @ MATS Stock / Super Stock @ MATS
This weekend.
$3,250 from Promoters / $500 for best Mopar Finisher (Thanks Mike and Paula Cotton) /
Contingency Award from Calvert Racing = A Great Day for Us!
We also had the opportunity to visit with new and old friends...
I moved a box and found four 1973 340 Automatic Thermoquads.
They have been in the shop since somewhere in the 70's
All shafts are tight and everything works as it should.
I have two 6319S and two 6340S
They are totally original and not messed with at all.
I would suggest putting a kit in them...
Here is a nice virgin set of 1971 exhaust manifolds that
have been on shelf since 70's in my Shop.
They have no damage or modifications.
Flapper is intact but will need cleaning as it is stuck
after sitting on the shelf for 50 years.
$850.00
plus $60.00 shipping in US