Search results for query: *

My A66 late 69 auto has a K9 4934S I also bought a new old stock Holley made in Japan under licence from Dodge as a replacement for the K9 4934S body is made in Japan float bowls are made in the USA

If it does it could be a sloppy lifter bore if it had the problem before the rebuild & after

Painter fixed a few small dents & Scratched changed the black vinyl top was white sprayed black changed to Gator grain all ready for some high build & undercoat Isaac in is a top painter see how the B5 color match goes

What is the idle speed how far does the pressure come up by increasing idle speed

Hi doing a respray anyone have the rear stripe measurements for a A66

Sonnax make the Splined Stub & Sleeve Kit it is made to weld into a 1 piece aluminum shaft

A lot of them are fitted with an Australian Valiant dash & Console

Local spotted filling up beautiful

Was the front & rear window stainless trim highly polished or more of a brushed satin look refitting front & rear glass after fitting new Gator grain not sure weather to polish the trim.

Were build sheets ever placed betwwen the sponge padding & the Vinyl on the rear seat.

Did you have to alter the crossmember & tunnel at all

This is using the local system surf blue on the right ,B5 on the left B5 missing a couple of toners

Anyone have the formula for B5 doing a respray . Computer color matching not very close to original.

They look like the washers that hold the speedo in usually have a rubber washer on it to stop vibration

Crank position sensor no good ?

Nice

some cars had 2 X stamped in the window channel to help line up ,i used hi temp adhesive. get it right first time the glue is not very forgiving if you have to lift to realign

Delcor also favorite amongst the boaties here although the Optima red top make good fishing sinkers had 3 that rotted the positive post off inside the battery after 3 years

Rebuilding a TA 727 did it have a special deeper pan or was it a standard 727 pan

I used PST 1.03 in my 70 Challenger with a 6.4 Hemi sagged like a set of .86 bars changed to a set from Summit Hotchkis 1.12 car sits nice was told the PST bars were soft hard to get quality spring steel at the moment Bergaman has them from time to time Summit are showing 1 set in stock