thank you both for answering, the instructions show it is needed or it can fry the inside module, it shows the ign wire go's to the resistor and then out to the coil but it shows the red wire that leads to the dist. needs to be before the resistor so if i use the factory resistor on the...
i have a 70 challenger that i put a shaker hood on, the hood wont stay up, it has the big springs on them, i have tried to find new springs but i can only find the small fiberglass hood springs, my question is do you think the springs are bad or worn out hinges, or anyone know where to find...
could any body help me to determine how to id a rally dash wire harness from a standard dash harness? i have a couple of harnesses to post for sale and i know one of them is from a rally dash but i want to make sure and list it correctly. thank you!!
thank you for all the replies, i went into the frame rail and fit perfect, i felt the tube under the floor pan was a little unstable so i put a small wire loom that fit the tube perfectly on the inside of the frame rail with a small screw to hold it in place and there is no movement at all with...
i am looking for the proper venting of my 70 challenger fuel tank, i have the nipple on the filler tube, the tank has been replaced and there are no nipples on the tank, the sender unit has a large nipple and a small nipple i am hoping that the large should be the fuel line to carb and the small...