WTB 74 cuda front grille filler

[Ohiowoodchuck]

Looking for the front grille filler that goes along the bottom of the grille. Please pm if you have one. Thanks gents.

 

[Heywodja]

I eliminated the bumper filler by drilling new fastener location in the mounting brackets, allowing me to slide the bumper onto the pockets on the fenders. Looks way better, and lets face it, that bumper isn't going to provide any protection anyway. The front brackets will work. They need to be moved back from the factory location 2 of the 4 holes in the frame will line up. You just have to drill the other 2 holes in the bracket and they'll mount in the 70-71 location. Then you take the heavy reinforcing bar (20 Pounds) off the chrome bumper and mount the chrome bumper directly to the brackets. It should look just like 70-71 style.

The rear bumper is more difficult.
For the rear bumper it's way easier to just buy the correct bumper brackets for a 70-71 bumper.

 

[Ohiowoodchuck]

Believe it or not I found one. I thought that was going to be one of the hardest parts yet.