Bob Nossal
Active Member
- Joined
- Jul 6, 2018
- Messages
- 39
- Reaction score
- 1
I have an A-833 tail shaft housing usable for E-Body only. The B-Body shifter mount bosses were ground off.
Someone suggested that this may have been done to fit the tail shaft into an A-Body. I don’t know enough to understand that logic.
Anyway, it’s a usable piece for an E-Body if someone wants it for cheap [$25] plus shipping.
Someone suggested that this may have been done to fit the tail shaft into an A-Body. I don’t know enough to understand that logic.
Anyway, it’s a usable piece for an E-Body if someone wants it for cheap [$25] plus shipping.
