Cuda Misc Sheet Metal + cuts

[440WB]

70-74 Cuda sheet metal cuts from parts cars -
everything listed is used -
most of it is in decent usable condition.
if not listed - ask - I may have it?
=========================================
lower driver quarter patch panel newer repo -$35
upper quarter middle section ( good for extra metal ) $30
lower driver fender patch ( from Layson's 1990's ) $65
front fender inside frame supports - $25
front fender lip surround - $25
front fender 71 ( no gill cut out ) $40
front fender - headlight buckets both 70 and 71 - $40
rear quarter window side metal - $20
top of cowl cut for lower windsheild - $40
A pillar to dash corner web braces - $40
A pillar upper - $40
A pillar lower hinge sections - $45
rear door pillar sections - $65
rocker cut sections - $35
inner fenders - $40 - 150
tail panel - $120
trunk gutter side pieces - $65
sail panel section - $70
quarter sections of roof both sides - $35
rear speaker decks - $40 - 220
front frame half sections - $40
front passenger FULL frame + attachments + Apron + brackets - $450
gas tank trunk supports - $50
---------------------------------------------------
best to pm with your email for me to send pics.
OBO Price -
allow for ship price as extra cost -

located in Romeo, Mi 48065

 

[walleyebum]

can you send me a pm,somehow I can't send any need some of the sheet metal parts

 

[440WB]

PM SENT

 

[Cuda Hunter]

Pm sent

 

[440WB]

ok - PM replied too with info -

thanks J -

 

[Cato Vinther]

Hi. I need a cut from left side from Firewall and cowl. do you have that?
Can send pictures

Cato

 

[440WB]

how much of a hurry are you?

I have it, it may be a week of two for me to get to it

 

[moparchuck]

440WB, your inbox is full. I'm looking for the headlight area for a 1970 cuda left fender. My headlight bucket area rusted away. You can email pics/info/price to [email protected]

Chuck

 

[Cato Vinther]

how much of a hurry are you?

I have it, it may be a week of two for me to get to it

how much of a hurry are you?

I have it, it may be a week of two for me to get to it

Not in that of a hurry.
Can you send me an email address so I can send you a picture of what I need.

 

[440WB]

Not in that of a hurry.
Can you send me an email address so I can send you a picture of what I need.

pm sent

 

[tommie69]

pm sent

 

[440WB]

440WB, your inbox is full. I'm looking for the headlight area for a 1970 cuda left fender. My headlight bucket area rusted away. You can email pics/info/price to [email protected]

Chuck

I have a headlight bucket -
when you say left fender - you mean Driver side - yes?

 

[Cato Vinther]

Hi 440WB
I have sent you some emails.
When do you think you will check the cuda for the firewall and cowl.

Cato

 

[cudas rule]

Do you still have the torsion bar crossmember ends, if so how much for them? Thanks

 

[Da 70 Challenger]

Looking for the back seat braces that run from the floor to the package tray for a Cuda, thanks.

 

[bobs73challenger]

Hi,

Interested in a cut from the drivers side firewall -- Actually, as much of the drivers side firewall as you can manage, the area around my brake booster is toast.