WTB E body convertible pieces needed

[challngrvert]

Looking for A pillars, upper interior windshield header trim and corners, for cuda challenger convertible. Also looking for rear tacking strips and hardware . Not quite sure if the trunk lid torsion bars are different on a convertible challenger but I need those as well if they are different from a hard top. Need a rear seat for convertible challenger as well. Please let me know! Thanks!

 

[NixDad]

A-Pillar moldings are the same as hardtop except cut off.
There are many A-pillars for hardtops out there that have broken ends and are great donors for cutting off and using on a convertible. If you need to know where to cut, let me know i saved a part.
Taking strip is something a Trim shop would use new.

 

[moparmarks]

Convertible deck lid T/rods are different than H/T, Challenger are different than Cuda and 70's are different than 71's.

 

[challngrvert]

I’d rather avoid cutting and find the right pieces. On the torsion rods for trunk , great another hard to find part I’m sure.

 

[moparmarks]

Ya they suck. I needed one for a 71 Cuda vert. A guy wanted 600.00 smackers for one which he probably got, just not from me.

 

[Mike Terzis]

Looking for A pillars, upper interior windshield header trim and corners, for cuda challenger convertible. Also looking for rear tacking strips and hardware . Not quite sure if the trunk lid torsion bars are different on a convertible challenger but I need those as well if they are different from a hard top. Need a rear seat for convertible challenger as well. Please let me know! Thanks!

i have the rear tacking strips the 2 short pieces , good luck for the seat i am also looking for one

 

[RJHJR]

Topsdown.com Makes new tack strips. Perfect match. Close to the best price on motors and ram cylinders.

 

[challenger6pak]

299-RS Mopar 1970-71 E-body Convertible Rear Seat Frame

 

[ldr]

i have one set of original tack strips left 304 797 0607 and a few other parts