Repeat 70-72 Challenger front bumper brackets and pass door handle needed

[troyintahoe]

I need 70-72 challenger front bumper brackets and a good pass door handle.

The earlier brackets hold the bumper closer to the body. I don't want 73-74. Disreguard my earlier post. Troy wright3745@gmail.com

 

[burdar]

If you can't find 70-72 brackets, the 73-74's are very easily modified to pull the bumper in. You just need to drill (4) 5/8" holes. That's it. If your not concerned with 100% origonality, that's the cheapest way to do it.

 

[troyintahoe]

Brackets

Thanks The early brackets seem to be the most common. Hopefully I'll find a set soon, I don't want to pay $130 plus shipping for repro's.

 

[cudarick]

Parts

On the bumper brackets, they are new would be 139. plus shipping, and the door handle we have new or used. Just let us know, hopefully we can help.

 

[Cranky]

On the bumper brackets, they are new would be 139. plus shipping, and the door handle we have new or used. Just let us know, hopefully we can help.

How much for a used passenger door handle?

 

[troyintahoe]

Challenger

Door handle purchased, I paid $30 to the door.

 

[cudarick]

Cranky

Used passenger is 25 plus shipping.

 

[Cranky]

Thanks Rick.

Troy, I have one bumper bracket which is for the passenger side but I don't remember if it's off a Challenger or a Cuda. It has part numbers 2962330 on the inner bracket and 2962334 on the outter. Both have 46229 on em. I used to part B and E body cars in the mid 70's and this is a left over from back then. I didn't part many Cuda's so I'm pretty sure this one is for a Challenger....

 

[troyintahoe]

I'm gonna pass on the single. Thanks a bunch for looking. I think I am just going to try and drill out the existing mounts to get the bumper pulled in. I've been reading up on it.