Working through some rust repair on my 71. I don't intend to relead this seam.
Through research I've discovered that the suggested action is to weld the seam solid, then come in with a metal filler over the top. It gets welded solid, and then light coats of filler.
I was curious as to if anyone has done this? I don't plan to cut the seam out.
Through research I've discovered that the suggested action is to weld the seam solid, then come in with a metal filler over the top. It gets welded solid, and then light coats of filler.
I was curious as to if anyone has done this? I don't plan to cut the seam out.