windshield trim clips as seem in photo, there are no trim clips for the windshield trim- around the turn, is there more that i missed??

[michael bucklew]

 

[Juan Veldez]

I have a 73 Chally. I have three studs for the clips coming down the pillar. There is one near the vinyl fold as you turn the corner on mine.

 

[michael bucklew]

I have a 73 Chally. I have three studs for the clips coming down the pillar. There is one near the vinyl fold as you turn the corner on mine.

not there-----checked and re checked before vinyl top and windshield install----

 

[michael bucklew]

not there-----checked and re checked before vinyl top and windshield install----

is there any way ti install clips after glass is in place

 

[Juan Veldez]

Not sure either the screw or the rivet can be successfully installed at the proper angle with the glass in place. Especially if there is no hole there yet.

 

[terrywalker]

If you try to install clips after the windshield is installed, be prepared to buy another windshield. I did.
Terry W.

 

[michael bucklew]

If you try to install clips after the windshield is installed, be prepared to buy another windshield. I did.
Terry W.

bee warned

 

[moparlee]

You can also just use the clip with a screw like what was used on the 70's.

 

[Challenger RTA]

Tape on outside.3 on each side.6 across the top. drill 1/16" hole then enlarge to 1/8". Use a small spacer in the channel to protect windshield and hold starting point. or drill a hole in a stick . Popsicle sticks or a piece of metal to hold you position. Use small needle nose to turn screw in.It's a pisser but it can be done.
Think you way out of this problem!

 

[michael bucklew]

Tape on outside.3 on each side.6 across the top. drill 1/16" hole then enlarge to 1/8". Use a small spacer in the channel to protect windshield and hold starting point. or drill a hole in a stick . Popsicle sticks or a piece of metal to hold you position. Use small needle nose to turn screw in.It's a pisser but it can be done.
Think you way out of this problem!
View attachment 97721

biggest thinking problem was not cracking glass

 

[Challenger RTA]

biggest thinking problem was not cracking glass

Did you get them drilled?

 

[michael bucklew]

Did you get them drilled?

no, working on other small details, but will try later on

Did you get them drilled?