Latest activity
-
fasjac replied to the thread Hello Y"all.Welcome to the site from Arkansas! -
moparleo replied to the thread rear height.Removing spring leafs could make the car dangerous in a hard, evasive maneuver. Anything that affects the suspension, has and effect on... -
my future set up on my restoration is a moderately camed 69 383hp , auto . i converting my 74 cuda build from 318/auto . i need to... -
-
Mmoparlee replied to the thread Getting on board in Hollyweird CA.Welcome from Michigan! Once you find your E-body start a thread on your project when you get underway so we can follow along.
-
I am VERY disappointed. Of all the Dudes and Military Veterans on this site, and not one rude/sarcastic comment about rear height...
-
Yep, from the factory, with equal size tires all around, the only E bodies that sat taller in the back were the AAR/TA twins. Everything...
-
Keep in mind that when changing the front spring perch height that you are also changing the pinion angle. Chrysler spent a lot of time...
-
That's a question that you should have not ask. I will answer in short from what I know. Then duck. No B pillar or frame on an E body...
-
The most important thing regarding ride height is that at rest on level ground, the leaf springs are just about perfectly flat on top...
-
You can lower the rear by raising the front leaf spring mount.
-
Might be easier to just add lowering blocks? Mine is around 26.5, don't like to see top of tire. https://postimages.org/][/url]
-
Howdy Here is a quick way to lower your rear, just flip your front leaf spring perches, it tucks the leaf springs higher up. It will...
-
Adjusting the power steering box seems beyond the scope of a front-end alignment. If the shop did indeed adjust it, I would consult... -
SThis seem to be an expensive route...
-
Mmoparlee replied to the thread New old guy.Welcome from Michigan and congrats on your recent retirement! Now you will have more time to enjoy that great looking collection.
