what kind of sale value for 71 cuda clone , hellcat swap , pro touring 5 speed

[panheadchuck]

I have a 71 cuda clone , painted satin black , all new smoked glass, hellcat engine , tko 600 5 speed, Gerst front and rear suspension with 8.75 35 spline 3.91 tru track , new interior , headliner , panel ,,vintage air , aeromotive hellcat swap tank , 4 wheel disc , brand new rallies with bfg ta 275/60 225/60
american auto wire classic update harness, restored oem grille. billet flywheel and twin disc clutch

car needs to have fuel , coolant lines run , and a helcrate wiring kit. bleed clutch master and brakes etc . all of the hard work is done

events may force a sale was just wondering what to ask

 

[70chall440]

It is going to be exceptionally difficult for anyone to put a value on this car without seeing it. Do some research and see what similar restomods are have sold for, then do some fuzzy math for what needs to be done and you should have a working number.

 

[panheadchuck]

It is going to be exceptionally difficult for anyone to put a value on this car without seeing it. Do some research and see what similar restomods are have sold for, then do some fuzzy math for what needs to be done and you should have a working number.

 

[panheadchuck]

Viintage air., as well.

 

[Cuda Hunter]

Can you tell me the amount you have spent on the car so far?
Is there a fender tag or build sheet? I know, the car is a promod, but sometimes value comes from the strangest places of a car.

Looks awesome.

 

[panheadchuck]

Can you tell me the amount you have spent on the car so far?
Is there a fender tag or build sheet? I know, the car is a promod, but sometimes value comes from the strangest places of a car.

Looks awesome.

Its a 318, auto , factory air , ps manual brake car. The fender tag is gone and probably doesent matter


car has new upholstery. New dash pad

new firewall and upper cowl.

quarters. Trunk pan

hellcrate , Tossed the junk rods and pistons

put in a set of h beams and mahle forged pistons.
Supercharger is ported.
Demon injectors.

mmx +1 nsr cam.
Vvt limiter
trend pushrods.

and the list goes on and on.

have a couple more as well.

 

[70chall440]

Definitely a high end build but putting a value on it is going to be difficult since it is not running and driving. Obviously it is worth quite a lot but exactly what the amount is will be a negotiation. You are going to have to find someone who wants it as you built it and accepts the value of the parts.

 

[panheadchuck]

Definitely a high end build but putting a value on it is going to be difficult since it is not running and driving. Obviously it is worth quite a lot but exactly what the amount is will be a negotiation. You are going to have to find someone who wants it as you built it and accepts the value of the parts.

Guess ill get it running. Be back in a week.

 

[moparleo]

Probably what will affect the market value the most is if it was done by a nationally known shop/person like Foose, Graveyard Carz or the like. If it was done by an unknown it will be hard to even get your cost back.

 

[panheadchuck]

Probably what will affect the market value the most is if it was done by a nationally known shop/person like Foose, Graveyard Carz or the like. If it was done by an unknown it will be hard to even get your cost back.

watched a bone stock 70 no suspension , 727 auto with a junkyard hellcat swap ,no ac , manual disc car sell locally for 113k last Oct . not too worried about getting costs back .Dodge did a fantastic job in their marketing dept . anything that says hellcat , redeye or demon sells like hotcakes . im just trying to figure out a decent asking price.

 

[moparleo]

Try to sell it at the same place that sold that car. The only thing you can do is total up what the parts cost you and figure what the market is on those parts. Otherwise any body's opinion is just that. Sorry you have to sell. Good luck

 

[panheadchuck]

Try to sell it at the same place that sold that car. The only thing you can do is total up what the parts cost you and figure what the market is on those parts. Otherwise any body's opinion is just that. So

Try to sell it at the same place that sold that car. The only thing you can do is total up what the parts cost you and figure what the market is on those parts. Otherwise any body's opinion is just that. Sorry you have to sell. Good luck

I get it. 71s are insane priced right now. Watched this 71
No front end , no fenders , no hood , no motor or trans. , no deck lid. Rusted roof from vinyl top. Quaters wasted. 21k. I was like wow.
I have seven of these things lol. Time to thin the herd.
HOWEVER. Even chevy guys love cudas. And they all want to buy at
Camaro prices. , i appriciate the help. Thank you guys

 

[Cuda Hunter]

Those are some awesome looking cuda's!
I know a shop that has done several modern hemi promods around the 50K number. Of course that's with a good body already.
Sounds like the car is a sweet ride. Perfect car to do a restomod to since it doesn't have the fender tag.

 

[panheadchuck]

Those are some awesome looking cuda's!
I know a shop that has done several modern hemi promods around the 50K number. Of course that's with a good body already.
Sounds like the car is a sweet ride. Perfect car to do a restomod to since it doesn't have the fender tag.

Yes i wouldnt dare touch a BS car. I dont even look at them when they come up for sale. Cuz i cant leave anything alone.
Or a nice bh bp with a tag.

 

[1971 Challenger Pacecar]

Great pics and a nice looking ride.. Thanks for sharing with us the cool stuff your putting in it!!.

 

[Rons340]

Panheadchuck,
Awesome build sir! I love to see things done right. In my opinion, you have far exceeded the fender tag specs & added tons of value, in my opinion. It's common to see this type of reso go for six figures on Mecham and Barrett Jackson.
Thanks for sharing the pics and good luck!

 

[panheadchuck]

Panheadchuck,
Awesome build sir! I love to see things done right. In my opinion, you have far exceeded the fender tag specs & added tons of value, in my opinion. It's common to see this type of reso go for six figures on Mecham and Barrett Jackson.
Thanks for sharing the pics and good luck!

Thank you Sir !!

This one has Rms alterktion and street lynx. Will be getting a forged shortblock 6.2 hellcat, Thitec cnc ported heads. Custom cam and a 2650 vengeance supercharger. Along with a built 8hp90.

 

[fk5aar]

Hell yea that’s awesome....wish I had those skills

 

[Cojohnso]

I have a 71 cuda clone , painted satin black , all new smoked glass, hellcat engine , tko 600 5 speed, Gerst front and rear suspension with 8.75 35 spline 3.91 tru track , new interior , headliner , panel ,,vintage air , aeromotive hellcat swap tank , 4 wheel disc , brand new rallies with bfg ta 275/60 225/60
american auto wire classic update harness, restored oem grille. billet flywheel and twin disc clutch

car needs to have fuel , coolant lines run , and a helcrate wiring kit. bleed clutch master and brakes etc . all of the hard work is done

events may force a sale was just wondering what to ask

That is one tough sale question. If I had to sell? I would need $95k (just to keep price under 3 digits) over $100k I believe interest would start to fall off for non running? This of course is just my opinion. I certainly could be wrong?

 

[panheadchuck]

That is one tough sale question. If I had to sell? I would need $95k (just to keep price under 3 digits) over $100k I believe interest would start to fall off for non running? This of course is just my opinion. I certainly could be wrong?

i think you are in the right , just watched a BONE STOCK 70 cuda clone 727, manual brake, manual steering car with a junkyard hellcat sell for 113 k here . i have two more as well