71 cuda frt fender stud/bolt location

[CUDA71383]

Good eve does anyone have pics of the stud/ bolt location on the 71 fenders looking for the fender to inner fender

 

[tonysrt]

Are you asking about the stud at the very bottom of the Fender? Are you using a fiberglass fender that isn't drilled? It is predrilled in the stock 71 fender and the inner fender. Don't know if pics would give exact location, but i could measure it out for you.

 

[Challenger RTA]

Is this the location your talking about?

 

[tonysrt]

I don't understand this forum. People ask questions and you try to be helpful and you get no response. Are E body people made up different then other Mopar owners? I have an E and A body and try to help when I can, but get a better response from the A body crowd. What am I missing here?

 

[rklein71]

Is this what you are looking for?

 

[Challenger RTA]

What your missing is to answer the question.the greatest question of all times. That is ,Is this an E body or an A body?

 

[CUDA71383]

Ok my bad so the location im looking for is the top of fender, the kit is correct with the studs provided in this fist pic those bolts are not correct there should be 3 studs along there some where and 2 bolts something like the second pic, I can't see them correctly in the 71 manual these r what I'm after!

 

[CUDA71383]

Also sorry for not getting back

 

[Challenger RTA]

Ok. I have seen them located 2nd and 3rd from the back. not all that sure what is correct.

 

[CUDA71383]

Ok. I have seen them located 2nd and 3rd from the back. not all that sure what is correct.

I'm a little passed i used to have a few pics of an original 71 hemi car for this purpose now can't find it grrrrr might have to find a brochure

 

[Challenger RTA]

I know I'm looking too. 2nd pic 70 71 hemi cuda. take note two in this picture. last one unrestored 71 challenger.

 

[rklein71]

There are two studs and nuts that hold the dog leg of the fender to the rocker. I don't believe any studs were used on the top edge of the fender.

 

[rklein71]

Here is a picture of what is claimed the most original 71 hemi cuda on the planet, unrestored. I don't see any studs on the top fender edge.

 

[Challenger RTA]

There are two studs and nuts that hold the dog leg of the fender to the rocker. I don't believe any studs were used on the top edge of the fender.

I've seen them there I do believe they are correct. could be an assemble line plant preference for locating.

 

[CUDA71383]

Well I'm sure there was studs on my 71, its hard to believe the 70 would be different...yes the 72 n up but who knows I might have to suck it up and bolt it. Just to put it out there this kit is from pro kit and they r excellent or they just made this kit for all a b e ????

 

[CUDA71383]

Well I'm sure there was studs on my 71, its hard to believe the 70 would be different...yes the 72 n up but who knows I might have to suck it up and bolt it. Just to put it out there this kit is from pro kit and they r excellent or they just made this kit for all a b e ????

Here is a picture of what is claimed the most original 71 hemi cuda on the planet, unrestored. I don't see any studs on the top fender edge.
View attachment 87819

Interesting there is no hood guide on this

 

[moparlee]

Interesting there is no hood guide on this

Yes there is. It's just barely visible behind the hood hinge.

My '71 Hamtramck built Challenger has all bolts on the fender top. Only studs are on the lower dog leg.

 

[Mike70]

From my 1970 Challenger RT/SE. No studs.

 

[heminut]

My 70, LA built Barracuda doesn't have any studs, all bolts.

 

[Cuda Hunter]

71 BH /6 A230
No studs.