Flathead31coupe
Well-Known Member
Is there a factory diagram of where they would have used the seam seal on the metal work on the inside or trunk area?Thanks
Thanks.....In the factory body service manual, there's a whole section "Sealing" on where all the sealer was applied. It even tells you the angle to hold the gun nozzle when applying the sealer.
Should be very close to the 71 Body Service manual link below. Someone might have the 73 pdf.
[/URL]
The '72-74 manuals on PDF's appear to be scarce as hens teeth. I had a thread here and another forum looking for one for free. I searched in vain. Yes there are places where you can buy and download them; some versions folks complain the watermarks added by the vendor obscure the images.In the factory body service manual, there's a whole section "Sealing" on where all the sealer was applied. It even tells you the angle to hold the gun nozzle when applying the sealer.
Should be very close to the 71 Body Service manual link below. Someone might have the 73 pdf.
ThanksThe '72-74 manuals on PDF's appear to be scarce as hens teeth. I had a thread here and another forum looking for one for free. I searched in vain. Yes there are places where you can buy and download them; some versions folks complain the watermarks added by the vendor obscure the images.
Only online version I could find is the '73 Body manual at the Internet Archive. You have to join to see it. Not available for download.
[/URL]
