floyd's latest activity
-
Thanks floyd, it’s a driver right now. Will fully restore down the road. Just need something to get a better ride than what I have now. -
floyd replied to the thread AAR Shocks.I put KYBs on one car, Monroes on another. Scuffed them and painted them black. You’ll get all kind of recommendations for better...
-
floyd replied to the thread Interior clip.Search for “u-nuts”. A pretty common fastener available at auto parts stores and hardware stores
-
floyd replied to the thread Glovebox Original vs Repro.Yes, not too bad. There were some offered for awhile that had a funky plasticized coating on them. I ended up re-using an original on...
-
As long as I had my glovebox out on my 71 Challenger to replace the heater core and perform a heater box rebuild, I thought I'd document...
-
Try @Chally fix first, then the inserts. A weld bead will also work (Oxy/Acetone, Stick or TIG) using a soft metal rod.
-
I use solid copper wire, fairly small gauge to fit close to flush into the screw threads. I believe the wire I’ve used is from...
-
I’ve had success tightly wrapping a small piece of copper wire in the threads of the screw, squeezing the wire ends in with needle nose...
-
floyd replied to the thread Stripped Sheet Metal Holes.I’ve seen recommendations to use a piece of solid copper wire fed into to the hole while twisting the screw in place. I saw an older...
-
-
Thanks for your help. I checked out Tony's and bought his. Very reasonable. Also, just and FYI, I called Jeff first because he was...
-
floyd replied to the thread Finish on ashtray housing?.Believe those are just painted. My cars all have black interior and that insert is a flat black. I have no experience with colored...
-
floyd replied to the thread Sun Visor Rods and Anchors Needed.Check with some of the well known used parts vendors. Used/crappy visors were fairly plentiful at Carlisle and the Nats so they’re out...
-
floyd replied to the thread WTB 26" radiator side bracket.Have you checked with Bob at Glen Ray? Glen-ray Radiators - All New Licensed Mopar Chrysler Dodge Plymouth Radiators
-
floyd replied to the thread FOR SALE New 1970 E-body Washer Fluid Bottle with OE-Appearing Electric Pump.@procuda Sure, send me a PM with your address and I’ll get you a shipping quote. Thanks
-
I have a very limited quantity of these backlit signs featuring the late-1960s era high-performance “checkerboard” Chrysler Parts logo...
-
